380-105 Datasheet, PDF (3/3 Pages) Glenair, Inc. – PowerTrip Connectors and Accessories Filter Receptacles

Accessories
380P*105 EMI/RFI Backshell (Non-Environmental)
SADDLE CLAMP DIMENSIONS
HOLES FOR .020 (0.5)
SAFETY WIRE
A
THREAD
FIL. HD.
TELESCOPING
SCREW 2 PLCS
Clamp
Size
06H
08H
Cable Range
Min.
Max.
In. mm. In. mm.
.250 6.4 .437 11.1
.312 7.9 .562 14.3
A Thread
Class 2B
.750-20UNEF
.875-20UNEF
B Max.
C Max.
In. mm. In. mm.
1.301 33.04 1.145 29.1
1.301 33.04 1.332 33.8
10H .350 8.9 .625 15.9 1.000-20UNEF 1.301 33.04 1.332 33.8
CABLE
RANGE ^C
12H .500 12.7 .750 19.1 1.1875-18UNEF 1.332 33.83 1.551 39.4
16H .625 15.9 .937 23.8 1.4375-18UNEF 1.426 36.22 1.770 45.0
B
20H .875 22.2 1.250 31.8 1.750-18UNS 1.613 40.97 2.113 53.7
24H 1.000 25.4 1.375 34.9 2.000-18UNS 1.645 41.78 2.363 60.0
28H 1.250 31.8 1.625 41.3 2.250-16UN 1.920 48.77 2.770 70.4
B
32H 1.437 36.5 1.875 47.6 2.500-16UN 1.920 48.77 3.020 76.7
ALTERNATE CONFIGURATION FOR LARGE CABLES
If the cable range exceeds the inside diameter
of the backshell shown in the table at right, the
backshell will be supplied with a transition
adapter and a second coupling nut. This style
of backshell is called a Style 2. The transition
adapter attaches to the connector. The
backshell and clamp fit over the cable jacket.
On straight exit backshells, the transition adapter
does not affect the length. On 45° and 90°
versions the transition adapter adds 1.00 inch
(25.4mm) maximum to the backshell length.
Shell
Size
18
20
24
28
32
36
40
Backshell
Inside
Diameter
In. mm.
.72 18.3
.85 21.7
1.04 26.4
1.35 34.3
1.62 41.1
1.82 46.3
2.05 52.0
SELF-LOCKING
COUPLING NUTS
CONNECTOR
TRANSITION
ADAPTER
CLAMP
BACKSHELL
H
© 2013 Glenair, Inc.
Series 970 PowerTrip™
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
69
E-Mail: [e-mail]