947-371 Datasheet, PDF (2/2 Pages) Glenair, Inc. – MIL-DTL-5015 Type Hermetic Receptacle

947-371
MIL-DTL-5015 Type Hermetic Receptacle
Jam Nut Mount Bulkhead Feed-Through
F
E
Recommended Panel Cut Out
TABLE II
Dash No.
G
H
J
01
.125 (3.2) 1.100 (27.9) 2.230 (56.6)
02
.250 (6.4) 1.224 (31.1) 2.360 (59.9)
03
.500 (12.7) 1.474 (37.4) 2.620 (66.5)
TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS
Shell
A Thread
B Dia
C
D
E Dia
F
Size
Class 2A
Max
Hex
Flats
± .005 (0.1)
Dim. Min.
G
8S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
44
48
1/2-28 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNEF
2-18 UNEF
2 1/4-16 UN
2 1/2-16 UN
2 3/4-16 UN
3-16 UN
1.000 (25.4)
1.125 (28.6)
1.250 (31.8)
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.500 (38.1)
1.500 (38.1)
1.650 (44.5)
1.875 (47.6)
2.000 (50.8)
2.188 (55.6)
2.438 (61.9)
2.688 (68.3)
2.938 (74.6)
3.188 (81.0)
3.438 (87.3)
3.688 (93.7)
.688 (17.5)
.812 (20.6)
.938 (23.8)
.938 (23.8)
1.062 (27.0)
1.062 (27.0)
1.250 (31.8)
1.250 (31.8)
1.375 (34.9)
1.500 (38.1)
1.625 (41.3)
1.750 (44.5)
2.000 (50.8)
2.250 (57.2)
2.500 (63.5)
2.750 (69.9)
3.000 (76.2)
3.250 (82.6)
.875 (22.2)
1.000 (25.4)
1.125 (28.6)
1.125 (28.6)
1.250 (31.8)
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.625 (41.3)
1.750 (44.5)
1.875 (47.6)
2.000 (50.8)
2.250 (57.2)
2.500 (63.5)
2.750 (69.9)
3.000 (76.2)
3.250 (82.6)
3.500 (88.9)
.510 (13.0)
.635 (16.1)
.760 (19.3)
.760 (19.3)
.885 (22.5)
.885 (22.5)
1.010 (25.7)
1.010 (25.7)
1.135 (28.8)
1.260 (32.0)
1.385 (35.2)
1.510 (38.4)
1.760 (44.7)
2.010 (51.1)
2.260 (57.4)
2.510 (63.7)
2.760 (70.1)
3.010 (76.5)
.219 (5.6)
.281 (7.1)
.344 (8.7)
.344 (8.7)
.406 (10.3)
.406 (10.3)
.469 (11.9)
.469 (11.9)
.531 (13.5)
.594 (15.1)
.656 (16.7)
.719 (18.3)
.844 (21.4)
.969 (24.6)
1.089 (27.7)
1.219 (31.0)
1.344 (34.1)
1.469 (37.3)
APPLICATION NOTES
1. To be identified with manufacturer’s name, part number
and date code, space permitting.
2. For pin/pin and socket/socket symmetrical layouts only,
consult factory for available insert arrangements.
6. Electrical safety limits must be established by the user.
Peak voltage, switching surge, transient voltage, etc.
should be used to determine the safety application.
7. Material/Finish:
3. Power to a given contact on one end will result in power to
contact directly opposite regardless of identification letter.
4. Hermeticity - Less than 1 x 10^-7 cc/sec at one atmosphere.
5. Metric Dimensions (mm) are indicated in parentheses.
Jam-nut, lock-ring, shell* - stainless steel/O.D. cadmium over nickel
Contacts - copper alloy/gold plated and alloy 52/gold plate
Insulators - High-grade rigid dielectric/N.A. and full glass
Interfacial seals and O-rings - silicone
* Additional shell materials available, including titanium and Inconel^®. Consult factory for ordering information.
© 2013 Glenair, Inc.
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-25
E-Mail: [e-mail]