947-259_15 Datasheet, PDF (2/2 Pages) Glenair, Inc. – MIL-DTL-5015 Type Hermetic

947-259
MIL-DTL-5015 Type Hermetic
Jam Nut Mount Bulkhead Feed-Thru
F
TABLE II
Dash No. G Max
H
J
E
01
.250
1.224
2.36
02
.500
1.474
2.62
RECOMMENDED PANEL CUT-OUT
TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS
Shell
A Thread
B Dia
C
D
E Dia
F
Size
Class 2A
Max
Hex
Flats
± .005 (0.1)
Dim. Min.
G
8S
10SL
12
12S
14
14S
16
16S
18
20
22
24
28
32
36
40
44
48
1/2-28 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNEF
2-18 UNEF
2 1/4-16 UN
2 1/2-16 UN
2 3/4-16 UN
3-16 UN
1.000 (25.4)
1.125 (28.6)
1.250 (31.8)
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.500 (38.1)
1.500 (38.1)
1.650 (44.5)
1.875 (47.6)
2.000 (50.8)
2.188 (55.6)
2.438 (61.9)
2.688 (68.3)
2.938 (74.6)
3.188 (81.0)
3.438 (87.3)
3.688 (93.7)
.688 (17.5)
.812 (20.6)
.938 (23.8)
.938 (23.8)
1.062 (27.0)
1.062 (27.0)
1.250 (31.8)
1.250 (31.8)
1.375 (34.9)
1.500 (38.1)
1.625 (41.3)
1.750 (44.5)
2.000 (50.8)
2.250 (57.2)
2.500 (63.5)
2.750 (69.9)
3.000 (76.2)
3.250 (82.6)
.875 (22.2)
1.000 (25.4)
1.125 (28.6)
1.125 (28.6)
1.250 (31.8)
1.250 (31.8)
1.375 (34.9)
1.375 (34.9)
1.625 (41.3)
1.750 (44.5)
1.875 (47.6)
2.000 (50.8)
2.250 (57.2)
2.500 (63.5)
2.750 (69.9)
3.000 (76.2)
3.250 (82.6)
3.500 (88.9)
.510 (13.0)
.635 (16.1)
.760 (19.3)
.760 (19.3)
.885 (22.5)
.885 (22.5)
1.010 (25.7)
1.010 (25.7)
1.135 (28.8)
1.260 (32.0)
1.385 (35.2)
1.510 (38.4)
1.760 (44.7)
2.010 (51.1)
2.260 (57.4)
2.510 (63.7)
2.760 (70.1)
3.010 (76.5)
.219 (5.6)
.281 (7.1)
.344 (8.7)
.344 (8.7)
.406 (10.3)
.406 (10.3)
.469 (11.9)
.469 (11.9)
.531 (13.5)
.594 (15.1)
.656 (16.7)
.719 (18.3)
.844 (21.4)
.969 (24.6)
1.089 (27.7)
1.219 (31.0)
1.344 (34.1)
1.469 (37.3)
APPLICATION NOTES
1. To be identified with manufacturer’s name, part number and date
to determine the safety application.
code, space permitting.
6. Material/Finish*:
2. For pin/pin and socket/socket symmetrical layouts only, consult
factory for available insert arrangements.
Jam-nut, lock-ring, shell - stainless steel/O.D. cadmium over
nickel
3. Power to a given contact on one end will result in power to
Contacts - copper alloy/gold plated and alloy 52/gold plate
contact directly opposite regardless of identification letter.
Insulators - High-grade rigid dielectric/N.A. and full glass
4. Hermeticity - Less than 1 x 10^-7 cc/sec at one atmosphere.
Interfacial seals and O-rings - silicone
5. Electrical safety limits must be established by the user. Peak
7. Metric Dimensions (mm) are indicated in parentheses.
voltage, switching surge, transient voltage, etc. should be used
* Additional shell materials available, including titanium and Inconel^®. Consult factory for ordering information.
© 2013 Glenair, Inc.
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-23
E-Mail: [e-mail]