947-259 Datasheet, PDF (2/2 Pages) Glenair, Inc. – Panel Mount Bulkhead Feed-Thru

947-259
MIL-DTL-5015 Type Hermetic
Panel Mount Bulkhead Feed-Thru
F
TABLE II
E
Dash No. G Max
H
J
01
.250
1.224
2.36
02
.500
1.474
2.62
Recommended Panel Cut Out
TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS
Shell
A Thread
B Dia
C
D
E Dia
F
Size
Class 2A
Max
Hex
Flats
± .005 (0.1)
Dim. Min.
8S
1/2-28 UNEF
1.000 (25.4) .688 (17.5)
.875 (22.2)
.510 (13.0)
.219 (5.6)
10SL 5/8-24 UNEF 1.125 (28.6) .812 (20.6) 1.000 (25.4) .635 (16.1)
.281 (7.1)
12
3/4-20 UNEF 1.250 (31.8) .938 (23.8) 1.125 (28.6) .760 (19.3)
.344 (8.7)
12S 3/4-20 UNEF 1.250 (31.8) .938 (23.8) 1.125 (28.6) .760 (19.3)
.344 (8.7)
14
7/8-20 UNEF
1.375 (34.9) 1.062 (27.0) 1.250 (31.8) .885 (22.5)
.406 (10.3)
14S 7/8-20 UNEF 1.375 (34.9) 1.062 (27.0) 1.250 (31.8) .885 (22.5) .406 (10.3)
16
1-20 UNEF
1.500 (38.1) 1.250 (31.8) 1.375 (34.9) 1.010 (25.7) .469 (11.9)
16S
1-20 UNEF
1.500 (38.1) 1.250 (31.8) 1.375 (34.9) 1.010 (25.7) .469 (11.9)
18 1 1/8-18 UNEF 1.650 (44.5) 1.375 (34.9) 1.625 (41.3) 1.135 (28.8) .531 (13.5)
20 1 1/4-18 UNEF 1.875 (47.6) 1.500 (38.1) 1.750 (44.5) 1.260 (32.0) .594 (15.1)
22 1 3/8-18 UNEF 2.000 (50.8) 1.625 (41.3) 1.875 (47.6) 1.385 (35.2) .656 (16.7)
24 1 1/2-18 UNEF 2.188 (55.6) 1.750 (44.5) 2.000 (50.8) 1.510 (38.4) .719 (18.3)
28 1 3/4-18 UNEF 2.438 (61.9) 2.000 (50.8) 2.250 (57.2) 1.760 (44.7) .844 (21.4)
32
2-18 UNEF
2.688 (68.3) 2.250 (57.2) 2.500 (63.5) 2.010 (51.1) .969 (24.6)
36
2 1/4-16 UN
2.938 (74.6) 2.500 (63.5) 2.750 (69.9) 2.260 (57.4) 1.089 (27.7)
F
40
2 1/2-16 UN
3.188 (81.0) 2.750 (69.9) 3.000 (76.2) 2.510 (63.7) 1.219 (31.0)
44
2 3/4-16 UN
3.438 (87.3) 3.000 (76.2) 3.250 (82.6) 2.760 (70.1) 1.344 (34.1)
48
3-16 UN
3.688 (93.7) 3.250 (82.6) 3.500 (88.9) 3.010 (76.5) 1.469 (37.3)
APPLICATION NOTES
1. To be identified with manufacturer’s name, part number and date
to determine the safety application.
code, space permitting.
6. Material/Finish*:
2. For pin/pin and socket/socket symmetrical layouts only, consult
factory for available insert arrangements.
Jam-nut, lock-ring, shell - stainless steel/O.D. cadmium over
nickel
3. Power to a given contact on one end will result in power to
Contacts - copper alloy/gold plated and alloy 52/gold plate
contact directly opposite regardless of identification letter.
Insulators - High-grade rigid dielectric/N.A. and full glass
4. Hermeticity - Less than 1 x 10^-7 cc/sec at one atmosphere.
Interfacial seals and O-rings - silicone
5. Electrical safety limits must be established by the user. Peak
7. Metric Dimensions (mm) are indicated in parentheses.
voltage, switching surge, transient voltage, etc. should be used
* Additional shell materials available, including titanium and Inconel®. Consult factory for ordering information.
© 2009 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-15
E-Mail: [e-mail]