947-042_15 Datasheet, PDF (2/2 Pages) Glenair, Inc. – MIL-DTL-5015 Type Hermetic

947-042
MIL-DTL-5015 Type Hermetic
Jam Nut Mount Bulkhead Feed-Through D Series Connector
with Pin/Socket Contacts
F
HERMETIC LEAK RATE MOD CODES
Designator
Required Leak Rate
E
–585A
1 x 10^-10 cc Helium per second
–585B
–585C
1 x 10^-9 cc Helium per second
1 x 10^-8 cc Helium per second
G
RECOMMENDED PANEL CUT-OUT
TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS
Shell
Size
A Thread
Class 2A
B Dia
Max
C
Hex
D
Flats
E Dia
± .005 (0.1)
F
+ .005 -.000
(+0.1 - 0.0)
08 1/2-28 UNEF 1.000 (25.4) .688 (17.5) .875 (22.2) .510 (13.0) .460 (11.7)
10 5/8-24 UNEF 1.125 (28.6) .812 (20.6) 1.000 (25.4) .635 (16.1) .578 (14.7)
12 3/4-20 UNEF 1.250 (31.8) .938 (23.8) 1.125 (28.6) .760 (19.3) .692 (17.6)
14 7/8-20 UNEF 1.375 (34.9) 1.062 (27.0) 1.250 (31.8) .885 (22.5) .817 (20.8)
16 1-20 UNEF 1.500 (38.1) 1.250 (31.8) 1.375 (34.9) 1.010 (25.7) .942 (23.9)
18 1 1/8-18 UNEF 1.750 (44.5) 1.375 (34.9) 1.625 (41.3) 1.135 (28.8) 1.060 (26.9)
20 1 1/4-18 UNEF 1.875 (47.6) 1.500 (38.1) 1.750 (44.5) 1.260 (32.0) 1.185 (30.1)
22 1 3/8-18 UNEF 2.000 (50.8) 1.625 (41.3) 1.875 (47.6) 1.385 (35.2) 1.310 (33.3)
24 1 1/2-18 UNEF 2.188 (55.6) 1.750 (44.5) 2.000 (50.8) 1.510 (38.4) 1.435 (36.4)
28 1 3/4-18 UNEF 2.438 (61.9) 2.000 (50.8) 2.250 (57.2) 1.760 (44.7) 1.687 (42.8)
32 2-18 UNEF 2.688 (68.3) 2.250 (57.2) 2.500 (63.5) 2.010 (51.1) 1.937 (48.6)
36 2 1/4-18 UN 2.938 (74.6) 2.500 (63.5) 2.750 (69.9) 2.260 (57.4) 2.177 (55.3)
© 2013 Glenair, Inc.
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-19
E-Mail: [e-mail]