710-652NF Datasheet, PDF (2/2 Pages) Glenair, Inc. – Multi-Port, Special Purpose Transitions

Series 72, 74, & 75
Multi-Port, Special Purpose Transitions
Dash
No.
20
21
22
23
24
26
28
30
31
32
33
34
35
36
37
38
40
42
60
A Thread
Class 2A
1 1/4 - 18 UNEF
1 5/16 - 18 UNEF
1 3/8 - 18 UNEF
1 7/16 - 18 UNEF
1 1/2 - 18 UNEF
1 5/8 - 18 UNEF
1 3/4 - 18 UNS
1 7/8 - 18 UNS
1 15/16 - 16 UN
2 - 18 UN
2 1/16 - 16 UNS
2 1/8 - 16 UN
2 3/16 - 16 UNS
2 1/4 - 16 UN
2 5/16 - 16 UNS
2 3/8 - 16 UN
2 1/2 - 16 UN
2 5/8 - 16 UN
3 3/4 - 16 UN
TABLE I
B
Max
1.41 (35.8)
1.47 (37.3)
1.53 (38.9)
1.59 (40.4)
1.66 (42.2)
1.78 (45.2)
1.91 (48.5)
2.03 (51.6)
2.09 (53.1)
2.16 (54.9)
2.22 (56.4)
2.28 (57.9)
2.34 (59.4)
2.41 (61.2)
2.47 (62.7)
2.53 (64.3)
2.66 (67.6)
2.78 (70.6)
2.91 (73.9)
E
±.005 (.1)
.980 (24.9)
1.040 (26.4)
1.100 (27.9)
1.160 (29.5)
1.220 (31.0)
1.350 (34.3)
1.480 (37.6)
1.590 (40.4)
1.660 (42.2)
1.730 (43.9)
1.780 (45.2)
1.840 (46.7)
1.900 (48.3)
1.970 (50.0)
2.030 (51.6)
2.090 (53.1)
2.220 (56.4)
2.340 (59.4)
2.468 (62.7)
F
±.005 (.1)
1.095 (27.8)
1.157 (29.4)
1.220 (31.0)
1.280 (32.5)
1.345 (34.2)
1.470 (37.3)
1.595 (40.5)
1.720 (43.7)
1.770 (45.0)
1.845 (46.9)
1.900 (48.3)
1.960 (49.8)
2.020 (51.3)
2.085 (53.0)
2.145 (54.5)
2.210 (56.1)
2.335 (59.3)
2.460 (62.5)
3.590 (91.2)
TABLE II
Port Conduit
Conduit Code
A Thread
Dash No. Ref.
Class 2A
1
06
7/16 - 28 UNEF
2
08
1/2 - 20 UNEF
3
09
9/16 - 24 UNEF
4
10
9/16 - 24 UNEF
5
12
5/8 - 24 UNEF
6
14 11/16 - 24 UNEF
7
16
3/4 - 20 UNEF
8
20
7/8 - 20 UNEF
9
24
1 - 20 UNEF
10
28 1 3/16 - 18 UNEF
11
32 1 5/16 - 18 UNEF
D
±.005 (.1)
.187 (4.7)
.250 (6.4)
.281 (7.1)
.312 (7.9)
.375 (9.5)
.437 (11.1)
.500 (12.7)
.625 (15.9)
.750 (19.1)
.875 (22.2)
1.000 (25.4)
TABLE III
SYMBOL FINISH
B Olive Drab over Cadmium Plate
J
Gold Iridite over Cadmium Plate over Nickel
M Electroless Nickel
N Olive Drab over Cadmium Plate over Nickel
NC Zinc-Cobalt, Olive Drab
NF Olive Drab over Cadmium Plate over
Electroless Nickel (500 Hour Salt Spray)
T
Bright Dip Cadmium Plate over Nickel
Z1 Passivate
Notes:
1. Metric dimensions (mm) are in parentheses.
2. Plate diameter "B" is based on outlet combinations,
consult factory for appropriate size.
© 7/1999 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
109