400AC002M08 Datasheet, PDF (2/2 Pages) Glenair, Inc. – TAG Ring Backshell with Strain Relief

400-002
TAG^® Ring Backshell
with Strain Relief
Direct Coupling - Split Shell
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
Shell A-E-F
Size J-H-L-S D-B-G-K
C
08/09 1.180 (30.0) 1.250 (31.8)
10/11 1.180 (30.0) 1.250 (31.8)
12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1)
14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6)
16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6)
32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
1. Metric dimensions (mm) are indicated in
parentheses.
2. Cable range is defined as the accommo-
dations range for the wire bundle or cable.
Dimensions shown are not intended for
inspection criteria.
3. When using Connector Designator B refer
to pages 18 and 19 for part number
development.
TABLE IV: DIMENSIONS
Function C
Dash D
E
F
G
H
K
L
Max Wire
No. Max
Max
Max
Max
Max
Max
Max
Bundle
02 .440 (11.2) 1.500 (38.1) .680 (17.3) 1.440 (36.6) .340 (8.6) 2.060 (52.3) .681 (17.3) .250 (6.4)
03 .500 (12.7) 1.560 (39.6) .750 (19.1) 1.500 (38.1) .270 (6.9) 2.220 (56.4) .731 (18.6) .375 (9.5)
04 .560 (14.2) 1.630 (41.4) .810 (20.6) 1.570 (39.9) .270 (6.9) 2.220 (56.4) .731 (18.6) .375 (9.5)
05 .620 (15.7) 1.660 (42.2) .870 (22.1) 1.600 (40.6) .280 (7.1) 2.290 (58.2) .831 (21.1) .500 (12.7)
06 .680 (17.3) 1.760 (44.7) .930 (23.6) 1.700 (43.2) .420 (10.7) 2.340 (59.4) .981 (24.9) .625 (15.9)
07 .750 (19.1) 1.820 (46.2) 1.000 (25.4) 1.760 (44.7) .640 (16.3) 2.370 (60.2) 1.181 (30.0) .625 (15.9)
08 .820 (20.8) 1.880 (47.8) 1.060 (26.9) 1.820 (46.2) .640 (16.3) 2.370 (60.2) 1.181 (30.0) .625 (15.9)
09 .880 (22.4) 1.940 (49.3) 1.120 (28.4) 1.880 (47.8) .540 (13.7) 2.520 (64.0) 1.181 (30.0) .750 (19.1)
10 .940 (23.9) 2.000 (50.8) 1.180 (30.0) 1.940 (49.3) .540 (13.7) 2.520 (64.0) 1.181 (30.0) .750 (19.1)
TABLE V: CABLE ENTRY
Dash
M
Cable Entry
No.
Max
Max
02 .545 (13.8) .250 (6.4)
03 .670 (17.0) .375 (9.5)
04 .795 (20.2) .500 (12.7)
05 .920 (23.4) .625 (15.9)
06 1.045 (26.5) .750 (19.1)
07 1.170 (29.7) .875 (22.2)
08 1.295 (32.9) 1.000 (25.4)
09 1.420 (36.1) 1.125 (28.6)
10 1.670 (42.4) 1.250 (31.8)
Dash
No.
02
03
04
05
06
07
08
09
10
TABLE VI: CABLE ENTRY
N
Cable Range
Max
Min
Max
.968 (24.6) .125 (3.2) .250 (6.4)
1.046 (26.6) .250 (6.4) .375 (9.5)
1.156 (29.4) .250 (6.4) .500 (12.7)
1.218 (30.9) .375 (9.5) .625 (15.9)
1.343 (34.1) .500 (12.7) .750 (19.1)
1.468 (37.3) .625 (15.9) .875 (22.2)
1.593 (40.5) .625 (15.9) 1.000 (25.4)
1.718 (43.6) .750 (19.1) 1.125 (28.6)
1.843 (46.8) .875 (22.2) 1.250 (31.8)
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 40 - Page 15
E-Mail: [e-mail]