400AC001M08 Datasheet, PDF (2/2 Pages) Glenair, Inc. – TAG Ring Backshell with Strain Relief

400-001
TAG^® Ring Backshell
with Strain Relief
Rotatable Coupling - Split Shell
See inside back cover fold-out or pages 13 and 14 for Tables I and II.
Shell
Size
08/09
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
TABLE III: DIMENSIONS
D
E
F
G
H
J
K
Function C Max
Max
Max
Max
Max
Ref
Max
Max
Wire Bundle
.440 (11.2) 1.500 (38.1) .680 (17.3) 1.440 (36.6) .340 (8.6) 2.060 (52.3) .681 (17.3) .250 (6.4)
.500 (12.7) 1.560 (39.6) .750 (19.1) 1.500 (38.1) .270 (6.9) 2.220 (56.4) .731 (18.6) .375 (9.5)
.560 (14.2) 1.630 (41.4) .810 (20.6) 1.570 (39.9) .270 (6.9) 2.220 (56.4) .731 (18.6) .375 (9.5)
.620 (15.7) 1.660 (42.2) .870 (22.1) 1.600 (40.6) .280 (7.1) 2.290 (58.2) .831 (21.1) .500 (12.7)
.680 (17.3) 1.760 (44.7) .930 (23.6) 1.700 (43.2) .420 (10.7) 2.340 (59.4) .981 (24.9) .625 (15.9)
.750 (19.1) 1.820 (46.2) 1.000 (25.4) 1.760 (44.7) .640 (16.3) 2.370 (60.2) 1.181 (30.0) .625 (15.9)
.820 (20.8) 1.880 (47.8) 1.060 (26.9) 1.820 (46.2) .640 (16.3) 2.370 (60.2) 1.181 (30.0) .625 (15.9)
.880 (22.4) 1.940 (49.3) 1.120 (28.4) 1.880 (47.8) .540 (13.7) 2.520 (64.0) 1.181 (30.0) .750 (19.1)
.940 (23.9) 2.000 (50.8) 1.180 (30.0) 1.940 (49.3) .540 (13.7) 2.520 (64.0) 1.181 (30.0) .750 (19.1)
TABLE IV: CABLE ENTRY
Dash
L
Cable Entry
No.
Max
Max
02 .545 (13.8) .250 (6.4)
03 .670 (17.0) .375 (9.5)
04 .795 (20.2) .500 (12.7)
05 .920 (23.4) .625 (15.9)
06 1.045 (26.5) .750 (19.1)
07 1.170 (29.7) .875 (22.2)
08 1.295 (32.9) 1.000 (25.4)
09 1.420 (36.1) 1.125 (28.6)
10 1.670 (42.4) 1.250 (31.8)
Dash
No.
02
03
04
05
06
07
08
09
10
TABLE V: CABLE ENTRY
M
Cable Range
Max
Min
Max
.968 (24.6) .125 (3.2) .250 (6.4)
1.046 (26.6) .250 (6.4) .375 (9.5)
1.156 (29.4) .250 (6.4) .500 (12.7)
1.218 (30.9) .375 (9.5) .625 (15.9)
1.343 (34.1) .500 (12.7) .750 (19.1)
1.468 (37.3) .625 (15.9) .875 (22.2)
1.593 (40.5) .625 (15.9) 1.000 (25.4)
1.718 (43.6) .750 (19.1) 1.125 (28.6)
1.843 (46.8) .875 (22.2) 1.250 (31.8)
1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not
available in Function C). Dimensions D, E, F and G will not apply. Please
consult factory.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for the wire bundle or
cable. Dimensions shown are not intended for inspection criteria.
4. Angular function "C", low-profile split elbow, not available with "S" connector
designator.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 40 - Page 9
E-Mail: [e-mail]