400AA002M08 Datasheet, PDF (2/2 Pages) Glenair, Inc. – TAG Ring Backshell with Strain Relief

400-002
TAG^® Ring Backshell
with Strain Relief
Direct Coupling - Low Profile
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
Shell A-D-E-F
Size J-H-L-S
B-G-K
C
08/09 1.000 (25.4) 1.250 (31.8)
10/11 1.000 (25.4) 1.250 (31.8)
12/13 1.000 (25.4) 1.250 (31.8) 1.735 (44.1)
14/15 1.000 (25.4) 1.250 (31.8) 1.915 (48.6)
16/17 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
18/19 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
20/21 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
22/23 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
24/25 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
28/29 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
32/33 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
36 1.000 (25.4) 1.416 (36.0) 1.915 (48.6)
40 1.000 (25.4) 1.687 (42.9) 1.915 (48.6)
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
1. When maximum cable entry (page 22) is exceeded, Style
2 will be supplied. (Function S only).
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for
the wire bundle or cable. Dimensions shown are not
intended for inspection criteria.
4. Consult factory for shorter lengths on straight backshells.
5. When using Connector Designator B refer to pages 18
and 19 for part number development.
TABLE IV: ELBOW DIMENSIONS
Elbow
E
F
G
Size
Max
Max
Max
02 .630 (16.0) 1.720 (43.7) .636 (16.2)
03 .630 (16.0) 1.720 (43.7) .709 (18.0)
04 .692 (17.6) 1.780 (45.2) .734 (18.6)
05 .755 (19.2) 1.870 (47.5) .829 (21.1)
06 .848 (21.5) 1.970 (50.0) .990 (25.1)
07 1.036 (26.3) 2.170 (55.1) 1.000 (25.4)
08 1.130 (28.7) 2.310 (58.7) 1.325 (33.7)
09 1.130 (28.7) 2.310 (58.7) 1.325 (33.7)
10 1.130 (28.7) 2.310 (58.7) 1.325 (33.7)
H
Max
1.670 (42.4)
1.790 (45.5)
1.810 (46.0)
1.880 (47.8)
1.970 (50.0)
2.140 (54.4)
2.250 (57.2)
2.250 (57.2)
2.250 (57.2)
TABLE V: CABLE ENTRY
Dash
K
Cable Entry
No.
Max
Max
02 .545 (13.8) .250 (6.4)
03 .670 (17.0) .375 (9.5)
04 .795 (20.2) .500 (12.7)
05 .920 (23.4) .625 (15.9)
06 1.045 (26.5) .750 (19.1)
07 1.170 (29.7) .875 (22.2)
08 1.295 (32.9) 1.000 (25.4)
09 1.420 (36.1) 1.125 (28.6)
10 1.670 (42.4) 1.250 (31.8)
Dash
No.
02
03
04
05
06
07
08
09
10
TABLE VI: CABLE ENTRY
L
Cable Range
Max
Min
Max
.968 (24.6) .125 (3.2) .250 (6.4)
1.046 (26.6) .250 (6.4) .375 (9.5)
1.156 (29.4) .250 (6.4) .500 (12.7)
1.218 (30.9) .375 (9.5) .625 (15.9)
1.343 (34.1) .500 (12.7) .750 (19.1)
1.468 (37.3) .625 (15.9) .875 (22.2)
1.593 (40.5) .625 (15.9) 1.000 (25.4)
1.718 (43.6) .750 (19.1) 1.125 (28.6)
1.843 (46.8) .875 (22.2) 1.250 (31.8)
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 40 - Page 11
E-Mail: [e-mail]