380AC107B08 Datasheet, PDF (2/2 Pages) Glenair, Inc. – EMI/RFI Non-Environmental Backshell with Strain Relief

380-107
EMI/RFI Non-Environmental Backshell
with Strain Relief
Type D - Self-Locking - Rotatable Coupling - Split Shell
See Page H-2 for Table I: Backshell Interface Dimensions
TABLE II: FINISHES
Symbol
Finish
B
Cadmium Plate, Olive Drab
M
Electroless Nickel
NF
Cadmium Plate, Olive Drab
over Electroless Nickel
MT Nickel Flourocarbon polymer (Ni-PTFE)
TABLE III: DIMENSIONS
Shell
F
G
H
J
K
L
M
Function C Max
Size
Max
Max
Max
Max
Max
Max
Max
Wire Bundle
08/09 .596 (15.1) 1.730 (43.9) .836 (21.2) 1.670 (42.4) .496 (12.6) 1.920 (48.8) .837 (21.3) .250 (6.4)
10/11 .656 (16.7) 1.785 (45.3) .906 (23.0) 1.725 (43.8) .426 (10.8) 2.080 (52.8) .887 (22.5) .375 (9.5)
12/13 .716 (18.2) 1.855 (47.1) .966 (24.5) 1.795 (45.6) .426 (10.8) 2.080 (52.8) .887 (22.5) .375 (9.5)
14/15 .776 (19.7) 1.887 (47.9) 1.026 (26.1) 1.827 (46.4) .436 (11.1) 2.150 (54.6) .987 (25.1) .500 (12.7)
16/17 .836 (21.2) 1.987 (50.5) 1.086 (27.6) 1.927 (48.9) .576 (14.6) 2.200 (55.9) 1.137 (28.9) .625 (15.9)
18/19 .906 (23.0) 2.045 (51.9) 1.156 (29.4) 1.985 (50.4) .796 (20.2) 2.230 (56.6) 1.337 (34.0) .625 (15.9)
20/21 .976 (24.8) 2.106 (53.5) 1.216 (30.9) 2.046 (52.0) .796 (20.2) 2.230 (56.6) 1.337 (34.0) .625 (15.9)
22/23 1.036 (26.3) 2.167 (55.0) 1.276 (32.4) 2.107 (53.5) .696 (17.7) 2.380 (60.5) 1.337 (34.0) .750 (19.1)
24/25 1.096 (27.8) 2.225 (56.5) 1.336 (33.9) 2.165 (55.0) .696 (17.7) 2.380 (60.5) 1.337 (34.0) .750 (19.1)
Dash
No.
02
03
04
05
06
07
08
10
TABLE IV: CABLE ENTRY
N
Max
.968 (24.6)
1.046 (26.6)
1.156 (29.4)
1.218 (30.9)
1.343 (34.1)
1.468 (37.3)
1.593 (40.5)
1.843 (46.8)
Cable Range
Min
Max
.125 (3.2)
.250 (6.4)
.250 (6.4)
.375 (9.5)
.312 (7.9)
.500 (12.7)
.437 (11.1)
.625 (15.9)
.562 (14.3)
.750 (19.1)
.687 (17.4)
.875 (22.2)
.812 (20.6) 1.000 (25.4)
1.062 (27.0) 1.250 (31.8)
TABLE V: CABLE ENTRY
Dash
P
Cable Entry
No.
Max
Max
01
.656 (16.7)
.125 (3.2)
02
.781 (19.8)
.250 (6.4)
03
.906 (23.0)
.375 (9.5)
04 1.031 (26.2)
.500 (12.7)
05 1.156 (29.4)
.625 (15.9)
06 1.281 (32.5)
.750 (19.1)
07 1.406 (35.7)
.875 (22.2)
08 1.531 (38.9) 1.000 (25.4)
09 1.656 (42.1) 1.125 (28.6)
10 1.781 (45.2) 1.250 (31.8)
APPLICATION NOTES
1. When maximum cable entry is exceeded (not available in Function C), Style 2
will be supplied. Dimensions F, G, H and J will not apply. Please consult factory.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for the wire bundle or cable.
Dimensions shown are not intended for inspection criteria.
4. Angular function "C", low-profile split elbow, not available with "S" connector designator.
H
© 2008 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
H-15
E-Mail: [e-mail]