380AA104B08 Datasheet, PDF (2/2 Pages) Glenair, Inc. – EMI/RFI Non-Environmental Backshell with Strain Relief

380-104
EMI/RFI Non-Environmental Backshell
with Strain Relief
Type F - Direct Coupling - Low Profile
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
Shell A-E-F
Size J-H-L-S D-B-G-K
C
TABLE IV: ELBOW DIMENSIONS
Elbow
E
F
G
H
Size Max
Max
Max
Max
03 .457 (11.6) 1.602 (40.7) .500 (12.7) 1.612 (40.9)
08/09 1.180 (30.0) 1.250 (31.8)
04 .457 (11.6) 1.662 (42.2) .500 (12.7) 1.732 (44.0)
10/11 1.180 (30.0) 1.250 (31.8)
06 .520 (13.2) 1.722 (43.7) .595 (15.1) 1.752 (44.5)
12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) _{08 .582 (14.8) 2.062 (52.4) .610 (15.5) 2.072 (52.6)}
14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) _{10 .645 (16.4) 2.172 (55.2) .700 (17.8) 2.162 (54.9)}
16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) _{12 .738 (18.7) 2.362 (60.0) .885 (22.5) 2.332 (59.2)}
18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) _{16 .926 (23.5) 2.362 (60.0) .975 (24.8) 2.332 (59.2)}
20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) _{20 1.020 (25.9) 2.512 (63.8) 1.125 (28.6) 2.442 (62.0)}
22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) _{24 1.145 (29.1) 2.512 (63.8) 1.225 (31.1) 2.442 (62.0)}
24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) _{28 1.207 (30.7) 2.562 (65.1) 1.575 (40.0) 2.612 (66.3)}
28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) _{32 1.238 (31.4) 2.662 (67.6) 1.775 (45.1) 2.862 (72.7)}
32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
TABLE II: STANDARD FINISHES
40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
GLENAIR
SYMBOL FINISH
See inside back cover fold-out or pages 13 and 14
for unabridged Tables I and II.
B
Cadmium Plate, Olive Drab
M
Electroless Nickel
NF
Cadmium Plate, Olive Drab
Over Electroless Nickel
Dash
TABLE X: CABLE ENTRY
T
V
Cable Range
See Inside Back Cover
for Additional Finish Options
No.
Max
Max
Min
Max
1. When maximum cable entry (page 22) is
04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9)
exceeded, Style 2 will be supplied. Dimensions
06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1)
E, F, G and H will not apply. Please consult
08
10
.780 (19.8) 1.332 (33.8)
.780 (19.8) 1.332 (33.8)
.312 (7.9) .562 (14.3)
.350 (8.9) .625 (15.9)
factory.
2. Metric dimensions (mm) are indicated in
parentheses.
12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) _{3. Cable range is defined as the accommodations}
16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8)
range for the wire bundle or cable. Dimensions
20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8)
shown are not intended for inspection criteria.
24
28
1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9)
1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3)
4. Consult factory for shorter lengths on straight
backshells.
5. When using Connector Designator B refer to
32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6)
pages 18 and 19 for part number development.
TABLE XI: CABLE ENTRY
Dash
W
X
Y
Z
Cable Range
No.
Max
Max
Max
Max
Min **
Max
03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4)
04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9)
06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1)
08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3)
10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9)
12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1)
16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8)
20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8)
24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9)
28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3)
32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6)
* Not available in Style M clamp.
** Not Applicable Style D
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 38 - Page 113
E-Mail: [e-mail]