240-603 Datasheet, PDF (2/2 Pages) Glenair, Inc. – Environmentally Compatible Filter Receptacle

240-603
ARINC 600 Size 3
Environmentally Compatible Filter Receptacle
Table II: Insert Arrangements
Insert 07
100 #22
Insert 24
20 #20
4 #8 Twinax
Insert 16
24 #20
10 #16
Insert 13
6 #8 Twinax
(Grounded)
Insert blank
(for cavity C)
Insert 22
50 #16
4 #12
12
3
5
78
9
11
12
4
6
10
13
Insert 04
2 #5
4 #12
3 #16
4 #20
Insert 02
150 #22
Insert 15
110 #22
6 #20
5 #12 (Twinax)
Insert 05
70 #22
1 #5 (Coax)
Insert 08
70 #22
1 #5 (Coax)
Insert blank
(for cavity
A, B)
Insert 17
60 #20
Insert 12
10 #8 Twinax
(grounded)
Insert 14
118 #22
2 #8 (Twinax)
Table I: Capacitor Array Code / Capacitance Range
Class
Pi - Circuit (pF)
C - Circuit (pF)
X
160,000 - 240,000
80,000 - 120,000
Y
80,000 - 120,000
40,000 - 60,000
Z
60,000 - 90,000
30,000 - 45,000
A
38,000 - 56,000
19,000 - 28,000
B
32,000 - 45,000
16,000 - 22,500
C
18,000 - 33,000
9,000 - 16,500
D
8,000 - 12,000
4,000 - 6,000
E
3,300 - 5,000
1,650 - 2,500
F
800 - 1,300
400 - 650
G
400 - 600
200 - 300
J
70-120
35-60
H
Notes
1. Glenair ARINC 600 receptacle is designed to mate with COTS
ARINC 600 plug IAW ARINC 600 specification with the same
insert configuration and opposite gender
2. Material/Finish:
Shell: Aircraft Grade Aluminum
Insulators: High Grade Rigid Dielectric
PC Tail and Solder Cup Contacts: Copper Alloy/Gold over Nickel
3. Assembly to be permanently identified with (space
permitting) Glenair, part number, cavity and contact location,
and date code.
4. Insert arrangement in accordance with ARINC 600
5. EMI filter receptacle connector designed to meet or exceed
requirements of MIL-STD-2120 and ARINC 600.
6. Electrical Parameters:
Working Voltage - 200 VDC, 115 VAC 400Hz
Dielectric Withstanding Voltage (DWV) - 500 VDC
Insulation Resistance (IR) - 5000 Megohms min at 200 VDC
7. Custom filter types available (consult factory).
8. Additional mounting features available (consult factory).
9. Environmental compatibility features:
Single piece shell to limit any contaminants or moisture
ingress due to post-processing such as solder wash.
Termination area sealed via o-rings around each module.
Termination may utilize sealing compound to further aid in
environmental compatiblilty.
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
H-7
E-Mail: [e-mail]