050_316 Datasheet, PDF (13/15 Pages) Glenair, Inc. – PRODUCT BRIEF

050-316 Product Brief
PC Board Mount Dual-Transmitter
100 Mbps – 5 Gbps, MMF, 3.3V
Table 9
Two-Wire interface ID: Data Fields – Address A2h
Byte #
Data
Decimal Notes
Byte #
Data
Decimal Notes
0
Temp H Alarm MSB (Note 1)
26
TX Pwr L Alarm MSB (Note 4)
1
Temp H Alarm LSB (Note 1)
27
TX Pwr L Alarm LSB (Note 4)
2
Temp L Alarm MSB (Note 1)
28
TX Pwr H Warning MSB (Note 4)
3
Temp L Alarm LSB (Note 1)
29
TX Pwr H Warning LSB (Note 4)
4
Temp H Warning MSB (Note 1)
30
TX Pwr L Warning MSB (Note 4)
5
Temp H Warning LSB (Note 1)
31
TX Pwr L Warning LSB (Note 4)
6
Temp L Warning MSB (Note 1)
32
Reserved
7
Temp L Warning LSB (Note 1)
33
Reserved
8
Vcc H Alarm MSB (Note 2)
34
Reserved
9
Vcc H Alarm LSB (Note 2)
35
Reserved
10
Vcc L Alarm MSB (Note 2)
36
Reserved
11
Vcc L Alarm LSB (Note 2)
37
Reserved
12
Vcc H Warning MSB (Note 2)
38
Reserved
13
Vcc H Warning LSB (Note 2)
39
Reserved
14
Vcc L Warning MSB (Note 2)
40-45
Reserved
15
Vcc L Warning LSB (Note 2)
56-94
External Cal Constants (Note 6)
16
Tx Bias H Alarm MSB (Note 3)
95
Checksum for bytes 0-94
17
Tx Bias H Alarm LSB (Note 3)
96
Temperature MSB (Note 1)
18
Tx Bias L Alarm MSB (Note 3)
97
Temperature LSB (Note 1)
19
Tx Bias L Alarm LSB (Note 3)
98
Vcc MSB (Note 2)
20
Tx Bias H Warning MSB (Note 3)
99
Vcc LSB (Note 2)
21
Tx Bias H Warning LSB (Note 3)
100
TX Bias MSB (Note 3)
22
Tx Bias L Warning MSB (Note 3)
101
TX Bias LSB (Note 3)
23
Tx Bias L Warning LSB (Note 3)
102
TX Power MSB (Note 4)
24
TX Pwr H Alarm MSB (Note 4)
103
TX Power LSB (Note 4)
25
TX Pwr H Alarm LSB (Note 4)
Notes:
1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256 °C.
2. Supply voltage (VCC) is decoded as a 16 bit unsigned integer in increments of 100 μV.
3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 μA.
4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW.
5. Reserved
6. Bytes 56-94 are not intended from use but have been set to default values per SFF-8472.
7. Bytes 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment.
8. Byte 127 accepts a write but performs no action (reserved legacy byte).
9. Bytes 128-247 are write enabled (customer writable).
Byte #
Decimal
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120-122
123
124
125
126
127
128-247
248-255
Data
Notes
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Status/Control
Reserved
Flag Bits
Flag Bits
Reserved
Reserved
Flag Bits
Flag Bits
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved (Note 8)
Customer Writable (Note 9)
Vendor Specific
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: C
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 13 of 15
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]