M28840-3JW Datasheet, PDF (1/1 Pages) Glenair, Inc. – Strain Relief

M28840/3
Strain Relief
Glenair Connector
Designator G
MIL-C-28840
Basic Part No.
Designator
M28840/3 J W
Material and Finish Designator
W = Aluminum, Cadmium Olive
Drab over Electroless Nickel
.228
E
A Thread _(5.79)
Ref.
C
G
Wire Holes
(3 Equally
Spaced)
Telescoping Screw
Cable
and Lockwasher
Entry
F
Shell
Desig- Size A Thread
nator Ref. Class 2B
A 11 .750 - 20 UNEF
B 13 .875 - 20 UNEF
C 15 1.000 - 20 UNEF
D 17 1.125 - 18 UNEF
E 19 1.250 - 18 UNEF
F 23 1.438 - 18 UNEF
G 25 1.562 - 18 UNEF
H 29 1.875 - 16 UN
J 33 2.062 - 16 UNS
C
Max
1.028 (26.1)
1.141 (29.0)
1.263 (32.1)
1.387 (35.2)
1.513 (38.4)
1.703 (43.3)
1.825 (46.4)
2.143 (54.4)
2.329 (59.2)
TABLE I
E
F
Max
Max
1.650 (41.9) .903 (22.9)
1.650 (41.9) .977 (24.8)
1.765 (44.8) 1.151 (29.2)
1.874 (47.6) 1.281 (32.5)
1.918 (48.7) 1.406 (35.7)
1.962 (49.8) 1.576 (40.0)
2.006 (51.0) 1.666 (42.3)
2.301 (58.4) 2.046 (52.0)
2.389 (60.7) 2.209 (56.1)
G
Max
.929 (23.6)
.929 (23.6)
1.056 (26.8)
1.233 (31.3)
1.296 (32.9)
1.358 (34.5)
1.420 (36.1)
1.634 (41.5)
1.859 (47.2)
Cable Entry
Min
Max
.177 (4.5) .286 (7.3)
.177 (4.5) .286 (7.3)
.250 (6.4) .416 (10.6)
.291 (7.4) .476 (12.1)
.348 (8.8) .626 (15.9)
.429 (10.9) .831 (21.1)
.523 (13.3) .956 (24.3)
.643 (16.3) 1.081 (27.5)
.704 (17.9) 1.187 (30.1)
1. For complete dimensions see applicable Military Specification.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable Entry is defined as the accomodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
62-7
E-Mail: [e-mail]