M28840-2JW Datasheet, PDF (1/1 Pages) Glenair, Inc. – Strain Relief

Glenair Connector
Designator G
MIL-C-28840
A Thread
.228
(5.79)
Ref.
C
M28840/2
Strain Relief
Basic Part No.
Designator
M28840/2 J W
Material and Finish Designator
W = Aluminum, Cadmium Olive
Drab over Electroless Nickel
E
Wire Holes
(3 Equally
Spaced)
G
Telescoping Screw
and Lockwasher
Cable
Entry
F
TABLE I
Desig- Shell Size A Thread
nator Ref. Class 2B
A
11 .750 - 20 UNEF
B
13 .875 - 20 UNEF
C
15 1.000 - 20 UNEF
D
17 1.125 - 18 UNEF
E
19 1.250 - 18 UNEF
F
23 1.438 - 18 UNEF
G
25 1.562 - 18 UNEF
H
29 1.875 - 16 UN
J
33 2.062 - 16 UNS
C
Max
1.028 (26.1)
1.141 (29.0)
1.263 (32.1)
1.387 (35.2)
1.513 (38.4)
1.703 (43.3)
1.825 (46.4)
2.143 (54.4)
2.329 (59.2)
E
Max
1.071 (27.2)
1.071 (27.2)
1.280 (32.5)
1.392 (35.4)
1.517 (38.5)
1.642 (41.7)
1.767 (44.9)
1.905 (48.4)
1.968 (50.0)
F
Max
.903 (22.9)
.977 (24.8)
1.151 (29.2)
1.281 (32.5)
1.406 (35.7)
1.576 (40.0)
1.666 (42.3)
2.046 (52.0)
2.209 (56.1)
G
Max
.929 (23.6)
.929 (23.6)
1.056 (26.8)
1.233 (31.3)
1.296 (32.9)
1.358 (34.5)
1.420 (36.1)
1.634 (41.5)
1.859 (47.2)
Cable Entry
Min
Max
.177 (4.5) .286 (7.3)
.177 (4.5) .286 (7.3)
.250 (6.4) .416 (10.6)
.291 (7.4) .476 (12.1)
.348 (8.8) .626 (15.9)
.429 (10.9) .831 (21.1)
.523 (13.3) .956 (24.3)
.643 (16.3) 1.081 (27.5)
.704 (17.9) 1.187 (30.1)
1. For complete dimensions see applicable Military Specification.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable Entry is defined as the accomodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
62-6
E-Mail: [e-mail]