M28840-1JW Datasheet, PDF (1/1 Pages) Glenair, Inc. – Strain Relief

M28840/1
Strain Relief
Glenair Connector
Designator G
MIL-DTL-28840
Basic Part No.
Dash No.
M28840/1 J W
Material and Finish Designator
W = Aluminum, Cadmium Olive
Drab over Electroless Nickel
.228
E
A Thread
(5.79)
Ref.
C
Cable
Entry
F
Wire Holes
(3 Equally Spaced)
Telescoping Screw
and Lockwasher
Desig- Shell Size A Thread
nator Ref.
Class 2B
A
11
.750 - 20 UNEF
B
13
.875 - 20 UNEF
C
15 1.000 - 20 UNEF
D
17 1.125 - 18 UNEF
E
19 1.250 - 18 UNEF
F
23 1.438 - 18 UNEF
G
25 1.562 - 18 UNEF
H
29 1.875 - 16 UN
J
33 2.062 - 16 UNS
TABLE I
C
E
Max
Max
1.028 (26.1) 1.091 (27.7)
1.141 (29.0) 1.091 (27.7)
1.263 (32.1) 1.091 (27.7)
1.387 (35.2) 1.206 (30.6)
1.513 (38.4) 1.320 (33.5)
1.703 (43.3) 1.445 (36.7)
1.825 (46.4) 1.570 (39.9)
2.143 (54.4) 1.721 (43.7)
2.329 (59.2) 1.908 (48.5)
F
Max
.903 (22.9)
.977 (24.8)
1.151 (29.2)
1.281 (32.5)
1.406 (35.7)
1.576 (40.0)
1.666 (42.3)
2.046 (52.0)
2.209 (56.1)
Cable Entry
Closed
Open
.177 (4.5) .286 (7.3)
.177 (4.5) .286 (7.3)
.250 (6.4) .416 (10.6)
.291 (7.4) .476 (12.1)
.348 (8.8) .626 (15.9)
.429 (10.9) .831 (21.1)
.523 (13.3) .956 (24.3)
.643 (16.3) 1.081 (27.5)
.704 (17.9) 1.187 (30.1)
1. For complete dimensions see applicable Military Specification.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable Entry is defined as the accomodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
62-5
E-Mail: [e-mail]