ITSG3108AFK Datasheet, PDF (1/2 Pages) Glenair, Inc. – Cylindrical Plug Assembly with 90 Backshell

ITS 3108 (A) and ITS 3108 (R)
ITS 4108 (A) and ITS 4108 (R)
Cylindrical Plug Assembly with 90° Backshell
ITS G 31 08 A FK 20-27 P Y XXX
Bayonet Coupling
Grounding Fingers
(Omit for Standard)
Contact Type
31 - Solder
41 - Crimp
08 - 90° Plug Assembly
Connector/Backshell Class
A - Non-Environmental; Supplied
with Backshell Only
R - Environmental; Supplied with
Backshell and Grommet
L
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Intro 20-21)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Intro 6-25)
Material Option (Omit for Aluminum)
FK - Stainless Steel Passivate
MB - Marine Bronze
ØQ
U
F
Order Cable Clamps and
Sleeves Separately or Use
Mod Codes (Table II) to Add
Clamp toThis Assembly.
Application Notes:
IT 3057 C
Cable Clamp
IT 3420
Neoprene Sleeve
IT 3057 A
Cable Clamp
1. 90° plug assembly with backshell for the attachment of strain relief cable clamps.
2. Connector/Backshell Class “A” (non-environmental)—not supplied with grommet; Class “R” (environmental)—
supplied with grommet.
3. Standard materials configuration consists of aluminum alloy with cadmium olive drab finish.
4. Standard contact material consists of copper alloy with silver plating
(Gold plating available, see mod codes).
5. A broad range of other front and rear connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts
© 2006 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-122
E-Mail: [e-mail]