ITS3101GRFK Datasheet, PDF (1/2 Pages) Glenair, Inc. – In-Line Cylindrical Receptacle Assembly

ITS 3101 (GR) and ITS 4101 (GR)
In-Line Cylindrical Receptacle Assembly
with Rotating Clamp Nut Backshell for Heat-Shrink Tubing
ITS 31 01 GR FK 20-27 P Y XXX
Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
01 - In-Line
Connector/Backshell Class
GR - Environmental; Supplied with
Backshell for Heat Shrink
Tubing and Rotating Clamp Nut
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Intro 20-21)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Intro 6-25)
Material Option (Omit for Aluminum)
FK - Stainless Steel Passivate
MB - Marine Bronze
M
K
J
3.5
L1
ØQ
L
Application Notes:
1. In-line receptacle assembly with backshell for heat shrink tubing. Rotating coupling nut supplied.
2. Connector/Backshell Class “GR” (environmental)—wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with cadmium olive drab finish.
4. Standard contact material consists of copper alloy with silver plating
(Gold plating available, see mod codes).
5. A broad range of additional connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2006 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-46
E-Mail: [e-mail]