ITS3101GFK Datasheet, PDF (1/2 Pages) Glenair, Inc. – In-Line Cylindrical Receptacle Assembly

ITS 3101 (G) and ITS 4101 (G)
In-Line Cylindrical Receptacle Assembly
with Backshell for Heat Shrink Tubing
ITS 31 01 G FK 20-27 P Y XXX
Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
01 - In-Line
Connector/Backshell Class
G - Environmental; Supplied with
Grommet and Backshell for
Heat Shrink Tubing
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Intro 20-21)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Intro 6-25)
Material Option (Omit for Aluminum)
FK - Stainless Steel Passivate
MB - Marine Bronze
M
K
3.5
L1
ØQ
L
Application Notes:
1. In-Line receptacle with backshell for heat shrink tubing.
2. Connector/Backshell Class “G” (environmental)—Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with cadmium olive drab finish.
4. Standard contact material consists of copper alloy with silver plating
(Gold plating available, see mod codes).
5. A broad range of additional connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2006 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-44
E-Mail: [e-mail]