ITS-3106-A Datasheet, PDF (1/2 Pages) Glenair, Inc. – Straight Cylindrical Plug Assembly

ITS 3106 (A) and ITS 3106 (R)
ITS 4106 (A) and ITS 4106 (R)
Straight Cylindrical Plug Assembly
with Backshell for the Attachment of Additional Accessories
ITS G 31 06 A 20-27 P Y XXX
Reverse Bayonet Coupling
Mod Code Option (See Table II)
Grounding Fingers
(Omit for Standard)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Section A)
Contact Type
31 - Solder
41 - Crimp
Contact Gender
P - Pin
S - Socket
06 - Straight Plug
Connector/Backshell Class
A - Non-Environmental; Supplied
with Backshell Only
R - Environmental; Supplied with
Backshell and Grommet
Shell Size and Insert Arrangement
(See Section A)
B
L
ØQ
Order Cable Clamps and
Sleeves Separately or Use
Mod Codes (Table II) to Add
Clamp to This Assembly.
IT 3057 C
Cable Clamp
IT 3420
Neoprene Sleeve
IT 3057 A
Cable Clamp
Application Notes:
1. Straight plug with backshell for the attachment of strain relief cable clamps.
2. Connector/Backshell Class “A” (non-environmental)—Not supplied with wire sealing grommet;
Class “R” (environmental)—Supplied with backshell and grommet.
3. Standard materials configuration consists of aluminum alloy. For platings, see TABLE II finish options.
4. Standard contact material consists of copper alloy with silver plating or gold plating.
5. A broad range of other front and rear connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2010 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-104
E-Mail: [e-mail]