ITS-31038-A Datasheet, PDF (1/2 Pages) Glenair, Inc. – Rear Panel Mount Square Flange Receptacle Assembly

ITS 31038 (A) and ITS 31038 (R)
ITS 41038 (A) and ITS 41038 (R)
Rear Panel Mount Square Flange Receptacle Assembly
with 90° Backshell for the Attachment of Additional Accessories
ITS 31 038 A FP 20-27 P Y XXX
Reverse Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
038 - Rear Wall Mount
with 90° Backshell
Connector/Backshell Class
A - Non-Environmental; Supplied with
90° Backshell Only
R -Environmental; Supplied with
90° Backshell and Grommet
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Section A)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Section A)
Mounting Holes
FP - Non-Threaded Through Mounting
OMIT - For Std. (Threaded) Mounting
L
q ^SS
B
M
K
ØT
q RR
Fi^Fl. F
Thread
Order Cable Clamps and
Sleeves Separately or Use
Mod Codes (Table II) to Add
Clamp to This Assembly.
Application Notes:
IT 3057 C
Cable Clamp
IT 3420
Neoprene Sleeve
IT 3057 A
Cable Clamp
1. Rear panel mount square flange receptacle with 90° backshell. Threaded mounting holes. Optional non-
threaded mounting holes available.
2. Connector/Backshell Class “A” (non-environmental)—Not supplied with wire sealing grommet;
Class “R” (environmental)—Supplied with 90° backshell and grommet.
3. Standard materials configuration consists of aluminum alloy. For platings, see TABLE II finish options.
4. Standard contact material consists of copper alloy with silver plating or gold plating.
5. A broad range of additional connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2010 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-92
E-Mail: [e-mail]