ITS-31030-SP Datasheet, PDF (1/2 Pages) Glenair, Inc. – Rear Panel Mount Square Flange Receptacle Assembly

ITS 31030 (SP) and ITS 41030 (SP)
Rear Panel Mount Square Flange Receptacle Assembly
with Backshell for EMI/RFI Shield Termination
ITS 31 030 SP FP 20-27 P Y XXX
Reverse Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
030 - Rear Wall Mount
Connector/Backshell Class
SP - Environmental; Supplied with
Grommet and EMI/RFI Backshell
Mounting Holes
FP - Non-Threaded Through Mounting Holes
OMIT - For Standard (Threaded) Mounting Holes
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Section A)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Section A)
M
K
B
M
K
T
qR
Ø_T
qRR
M
K
T
qR
J
3.5
L1
qS
J
3.5
L1
L
qSS
J
L _3.5
L1
qS
L
Application Notes:
1. Rear panel mount square flange receptacle assembly with EMI/RFI Shield termination backshell. Backshell
features rotating coupling nut and a “braid-trap” nut for termination of the braided shielding. Heat-shrink tubing
may also be attached for additional environmental and mechanical protection. Threaded mounting holes.
Optional non-threaded mounting holes available.
2. Connector/Backshell Class “SP” (environmental)—Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy. For platings, see TABLE II finish options.
4. Standard contact material consists of copper alloy with silver plating or gold plating.
5. A broad range of additional connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2010 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-90
E-Mail: [e-mail]