ITS-31030-A Datasheet, PDF (1/2 Pages) Glenair, Inc. – Rear Panel Mount Square Flange Receptacle Assembly

ITS 31030 (A) and ITS 41030 (R)
Rear Panel Mount Square Flange Receptacle Assembly
with Backshell for the Attachment of Additional Accessories
ITS 31 030 A FP 20-27 P Y XXX
Reverse Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
030 - Rear Wall Mount
Connector/Backshell Class
A - Non-Environmental; Supplied
with Backshell Only
R - Environmental; Supplied with
Backshell and Grommet
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Section A)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Section A)
Mounting Holes
FP - Non-Threaded Through Mounting Holes
OMIT - For Standard (Threaded) Mounting Holes
B
M
K
Ø_T
q^RR
ØA
L
q^SS
Order Cable Clamps and
Sleeves Separately or Use
Mod Codes (Table II) to Add
Clamp to This Assembly.
Application Notes:
IT 3057 C
Cable Clamp
IT 3420
IT 3057 A
Neoprene Sleeve Cable Clamp
1. Rear panel mount square flange receptacle assembly with backshell for the attachment of strain relieving cable
clamps or other accessories. Threaded mounting holes standard. Optional non-threaded holes available.
2. Connector/Backshell Class “A” (non-environmental)—Not supplied with wire sealing grommet;
Class “R” (environmental)—Supplied with backshell and grommet.
3. Standard materials configuration consists of aluminum alloy. For platings, see TABLE II finish options.
4. Standard contact material consists of copper alloy with silver plating or gold plating.
5. A broad range of other front and rear connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2010 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-68
E-Mail: [e-mail]