ITS-3101-A Datasheet, PDF (1/2 Pages) Glenair, Inc. – In-Line Cylindrical Receptacle with Accessory Backshell

ITS 3101 (A) and ITS 4101 (R)
In-Line Cylindrical Receptacle with Accessory Backshell
and a Selection of Cable Clamps
ITS 31 01 A 20-27 P Y XXX
Reverse Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
01 - In-Line
Connector/Backshell Class
A - Non-Environmental; Supplied
with Backshell Only
R - Environmental; Supplied with
Backshell and Wire Sealing
Grommet
M
K
Mod Code Option (See Table II)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Section A)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Contact Arrangements,
Section A)
B
ØA
L
ØQ
Order Cable Clamps and
Sleeves Separately or Use
Mod Codes (Table II) to Add
Clamp toThis Assembly.
IT 3057 C
Cable Clamp
IT 3420
Neoprene Sleeve
IT 3057 A
Cable Clamp
Application Notes:
1. In-line cylindrical receptacle with backshell for the attachment of strain-relief cable clamps.
2. Connector/Backshell Class “A” (non-environmental)—Not supplied with wire sealing grommet;
Class “R” (environmental)—Supplied with backshell and grommet.
3. Standard materials configuration consists of aluminum alloy. For platings, see TABLE II finish options.
4. Standard contact material consists of copper alloy with silver plating or gold plating.
5. A broad range of other front and rear connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2010 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-30
E-Mail: [e-mail]