ITS-3101-A-M Datasheet, PDF (1/2 Pages) Glenair, Inc. – In-Line Cylindrical Receptacle Assembly

ITS 3101 A (M) and ITS 4101 A (M)
ITS 3101 R (M) and ITS 4101 R (M)
In-Line Cylindrical Receptacle Assembly
with Backshell for Use with Metric Cable Glands
ITS 31 01 A 20-27 P Y M25 XXX
Reverse Bayonet Coupling
Contact Type
31 - Solder
41 - Crimp
01 - In-Line
Connector/Backshell Class
A - Non-Environmental; Supplied
with Backshell Only
R - Environmental; Supplied
with Backshell and Grommet
Mod Code Option (See Table II)
Metric Thread
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal (See Section A)
Contact Gender
P - Pin
S - Socket
Shell Size and Insert Arrangement
(See Contact Arrangements,
Section A)
B
M
K
ØA
L
ØQ
Application Notes:
1. In-line cylindrical receptacle with rear-end backshell for use with metric thread backend connector accessories.
2. Connector/Backshell Class “A” (non-environmental)—Not supplied with wire sealing grommet;
Class “R” (environmental)—Supplied with backshell and grommet.
3. Standard materials configuration consists of aluminum alloy. For platings, see TABLE II finish options.
4. Standard contact material consists of copper alloy with silver plating or gold plating.
5. A broad range of metric connector accessories are available.
See our website and/or contact the factory for complete information.
6. Standard insert material is synthetic rubber.
Add “FR” prefix to front of part number to specify fire resistant inserts.
© 2010 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-36
E-Mail: [e-mail]