IPTG08M18-11SZC Datasheet, PDF (1/2 Pages) Glenair, Inc. – Plug Connector

IPT 08 M
Plug Connector
with 90° Backshell for Shield Termination and Shrink Boot
MIL-C-26482
Series l Type
IPT G 08 M 18-11 S Z C XX
Grounding Finger
(Omit for Standard)
08 - 90° Plug
Connector/Backshell Class
M - Envirionmental Plug with 90°
Backshell
Shell Size and
Insert Arrangements
L
Mod Code Options
See Table II
Contact Type
C - Crimp
(Omit for Solder Cup)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Contact Gender
P - Pin
S - Socket
G
C
B
A
APPLICATION NOTES
1. Plug with 90° backshell for terminating shielded cable. Also suitable for heat shrink boots.
2. Connector/Backshell Class “M” (environmental)­–­ –Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-108
E-Mail: [e-mail]