IPTG06MSE18-11SZ Datasheet, PDF (1/2 Pages) Glenair, Inc. – Straight Plug Connector

IPT 06 MSE
Straight Plug Connector
with Backshell Suitable for
EMI Shield Termination and Heat Shrink Boot
MIL-C-26482
Series l Type
IPT G 06 MSE 18-11 S Z XX
Mod Code Options
See Table II
Grounding Finger
(Omit for Standard)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
06 - Straight Plug
Connector/Backshell Class
MSE - Crimp Contact/Environmental
Plug with Backshell for EMI Shield
Termination and Heat Shrink Boot
Contact Gender
P - Pin
S - Socket
Shell Size and
Insert Arrangements
3.5 + 0.2
L1
L2
D3 D4 _{D5 D2 D6}
1
L3
62 Max.
D1
APPLICATION NOTES
1. Straight plug with backshell for heat shrink boot, and/or terminating EMI shielded cable.
2. Connector/Backshell Class “MSE” (crimp contact/environmental)­–­ –Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-26
E-Mail: [e-mail]