IPTG06GSE18-11SZ Datasheet, PDF (1/2 Pages) Glenair, Inc. – Straight Plug Connector

IPT 06 GSE
Straight Plug Connector
with Shrinkboot Backshell
MIL-C-26482
Series l Type
IPT G 06 GSE 18-11 S Z XX
Grounding Finger
(Omit for Standard)
06 - Straight Plug
Backshell/Connector Class
GSE - Crimp Contact/Environmental
with Heatshrink Boot Backshell
Mod Code Options
See Table II
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Contact Gender
P - Pin
S - Socket
Shell Size and
Insert Arrangements
L2
D3 D2
3.5 + 0.2
L1
D1
APPLICATION NOTES
1. Straight plug with backshell suitable for heat shrink boot; Environmental, connector includes wire sealing grommet.
2. Connector Class “GSE” (crimp contact/environmental)­.­
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-22
E-Mail: [e-mail]