IPT01M18-11SZC Datasheet, PDF (1/2 Pages) Glenair, Inc. – In-Line Receptacle Connector

IPT 01 M
In-Line Receptacle Connector
with Backshell for
EMI Shield Termination and Shrink Boot
MIL-C-26482
Series l Type
IPT 01 M 18-11 S Z C XX
01 - In-Line
Receptacle
Connector/Backshell Class
M - Environmental with Backshell for
EMI Shield Termination and Shrink Boot
Shell Size and
Insert Arrangements
Mod Code Options
See Table II
Contact Type
C - Crimp
(Omit for Solder Cup)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Contact Gender
P - Pin
S - Socket
CBA
G
APPLICATION NOTES
1. In-line receptacle with backshell for terminating EMI shielding and attaching heat shrink boots.
2. Connector/Backshell Class “M” (environmental)­–­ –Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-58
E-Mail: [e-mail]