IPT01A18-11SZCPHM11 Datasheet, PDF (1/2 Pages) Glenair, Inc. – In-Line Receptacle Connector

IPT 01 A...PHM_ _
In-Line Receptacle Connector
with PHM Backshell
and Sleeves to Accommodate Various Cable Sizes
MIL-C-26482
Series l Type
IPT 01 A 18-11 S Z C PHM11 XX
Mod Code Options
See Table II
01 - In-Line
Receptacle
PHM Thread Size
See Table I
Connector Class
A - Non-Environmental
Shell Size and
Insert Arrangements
Contact Gender
P - Pin
S - Socket
Contact Type
C - Crimp
(Omit for Solder Cup)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
BC
G
APPLICATION NOTES
1. In-line receptacle with a PHM backshell that assures an excellent mechanical and waterproof seal to IP65 when used with correct
neoprene sealing bushing. Rubber sleeves included to allow use of different diameter cables.
2. Connector Class “A” (non-environmental­)—no grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-44
E-Mail: [e-mail]