IPT00MSE18-11SZC Datasheet, PDF (1/2 Pages) Glenair, Inc. – Front Panel Mount Square Flange Receptacle

IPT 00 MSE
Front Panel Mount Square Flange Receptacle
with Backshell
for EMI Shield Termination and Shrink Boot
MIL-C-26482
Series l Type
IPT 00 MSE 18-11 S Z XX
Mod Code Options
See Table II
00 - Front Panel Mount
Square Flange Receptacle
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Connector/Backshell Class
MSE - Crimp Contact/Environmental with
Backshell for EMI Shield Termination
and Shrink Boot
Contact Gender
P - Pin
S - Socket
Shell Size and
Insert Arrangements
L5
L5
3.5 + 0.2
L1
L2
D1
E
D3 D4 _{D5 D2 D6}
1
L3
B
L4
APPLICATION NOTES
1. Front panel wall mount receptacle with backshell for terminating shielded cable, suitable for heat shrink boots; through mounting holes.
2. Connector/Backshell Class “MSE” (crimp contact/environmental)­–­ –Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-32
E-Mail: [e-mail]