IPT00M18-11SZC Datasheet, PDF (1/2 Pages) Glenair, Inc. – Front Panel Mount Square Flange Receptacle

IPT 00 M
Front Panel Mount Square Flange Receptacle
with Backshell
for EMI Shield Termination and Shrink Boot
MIL-C-26482
Series l Type
IPT 00 M 18-11 S Z C XX
Mod Code Options
See Table II
00 - Front Panel Mount
Square Flange Receptacle
Connector/Backshell Class
M - Environmental with Backshell for
EMI Shield Termination and Shrink
Boot
Shell Size and
Insert Arrangements
Contact Type
C - Crimp
(Omit for Solder Cup)
Alternate Insert Rotation (W, X, Y, Z)
Omit for Normal
Contact Gender
P - Pin
S - Socket
M
H
CBD
G
APPLICATION NOTES
1. Front panel wall mount receptacle with backshell for terminating shielded cable, suitable for heat shrink boots; through mounting holes.
2. Connector/Backshell Class “M” (environmental)­–­ –Wire sealing grommet supplied.
3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins.
4. Standard contact material consists of copper alloy with gold plating over nickel.
5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information.
6. Standard insert is high insulation synthetic rubber.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-34
E-Mail: [e-mail]