|
FO1004P-06-0 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Fiber Optic Cable Sets Inside-the-Box Receptacle/Pigtail Assembly | |||
|
Glenair ASAP Fiber Optic Cable Sets
Inside-the-Box Receptacle/Pigtail Assembly
with FiberCon® Backshell
D38999 Series III to ST, FC, SC, LC & SMA
PRODUCT FEATURES
ï® Jam-Nut and Wall Mount D38999 Series III Style
Fiber Optic Receptacle Connectors in Aluminum,
Composite or Stainless Steel
ï® ST, FC, SC, LC and SMA to D38999 Series III
Configurations
ï® Grommet Sealing and Micro-Alignment Backshells
in Aluminum, Composite and Stainless Steel
ï® Singlemode and Multimode Fiber Media
ï® Military Standard Dust Caps
ï® MIL-PRF-29504 Approved Termini
ï® Multichannel Capability: From 2 to 37 Channels
ï® Custom Lengths Available
Because Sometimes Strain-Relief and Exact Fiber
Alignment are a RequirementâEven Inside the Box
Termini Retraction and Its Effect On Micro-Bending
FiberCon Backshell Cavity
Retraction During Mating
Radius Should Not Exceed The
Fiber Minimum Bend Radius
The Glenair FiberCon® Backshell Assembly
Glenair can supply receptacle/pigtail assemblies with a FiberCon® Backshell that protects
fiber terminations and insures exact alignment of the fiber optic termini. The grommeted
backshell design prevents micro-bending of the fibers while providing optimum strain relief to the
overall cable. The unique design is available only from Glenair and is available as a component
part of this ASAP cable assembly. The turnkey assembly includes fiber optic wiring, Glenair
Backshell, MIL-DTL-38999 Style Connector, MIL-PRF-29504 Termini, Mil-Spec Dust-Caps and
customer specified marking and labeling.
© 2006 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. ⢠1211 AIR WAY ⢠GLENDALE, CA 91201-2497 ⢠818-247-6000 ⢠FAX 818-500-9912
www.glenair.com
B-42
E-Mail: sales@glenair.com
|
▷ |