CBGK-B Datasheet, PDF (1/4 Pages) Glenair, Inc. – CB Series “PogoPin” Connectors

CB Series “PogoPin” Connectors
Receptacle Connectors for Panel Mounting - 7 Contacts
Receptacles feature non-removable solder cup contacts or printed circuit
board terminals. Contacts are plated with hard gold. Stainless steel connector
body and jam nut. Shell is plated with black chromate finish. Silicone face seal
prevents water ingress when unmated. Open face pressure rating 0.4 bar. 5000
cycles mating durability.
Style 1
Style 2
Jam Nut Receptacle
Contact Types
Solder cup contacts accept up to
#20 AWG stranded wire (1mm max.
diameter). PC tail contacts are available
in two lengths: 3.5 mm and 8.0 mm
SOLDER CUP
#20 AWG
SHORT PC TAIL
Ø 0.53 x 3.5
8
7 Pin Receptacle
Connector Mating Face
and Key Positions
A
B
F
G
C
E
B
D
A
Position
1
2
3
4
A
90°
105°
110°
100°
B
120°
130°
135°
165°
Color
Code
White
Yellow
Green
Pink
Style 3
A
B
F
G
C
E
D
Style 4
1 Jam nut receptacle for rear panel
mounting (3.5 mm maximum panel
thickness). Supplied with stainless
steel jam nut and flat washer. Nitrile
O-ring provides watertight panel
seal. 13 grams maximum weight.
3 Two hole flange mount receptacle
for front panel mounting. Mounting
holes accept M3 screws, not
supplied. Use with optional gasket or
O-ring for watertight panel sealing.
16 grams maximum weight.
2 Jam nut receptacle with M14X1
accessory threads for rear panel
mounting (3.5 mm max. panel
thickness). Supplied with stainless
steel jam nut and flat washer. Nitrile
O-ring provides watertight panel
seal. 13 grams maximum weight.
4 "Thread-in" receptacle with PG9
threads for installation directly into
a tapped hole. Supplied with O-ring.
16 grams maximum weight.
7 Pin Panel Mount Receptacle
Mounting
Style
Polarizing
Contact Position 1
Fig. Type (Blue)
Jam Nut
Fig. 1 Solder Cup CB07C1L0
Jam Nut
Fig. 1 Short PC Tail CB07C1L1
Jam Nut
Fig. 1 Long PC Tail CB07C1L2
Jam Nut w/ Thd. Fig. 2 Solder Cup CB07T1L0
Jam Nut w/ Thd. Fig. 2 Short PC Tail CB07T1L1
Jam Nut w/ Thd. Fig. 2 Long PC Tail CB07T1L2
Flange
Fig. 3 Solder Cup CB07B1L0
Flange
Fig. 3 Short PC Tail CB07B1L1
Flange
Fig. 3 Long PC Tail CB07B1L2
Thread-In
Fig. 4 Solder Cup CB07Q1L0
Thread-In
Fig. 4 Short PC Tail CB07Q1L1
Thread-In
Fig. 4 Long PC Tail CB07Q1L2
Polarizing
Position 2
(Yellow)
CB07C2L0
CB07C2L1
CB07C2L2
CB07T2L0
CB07T2L1
CB07T2L2
CB07B2L0
CB07B2L1
CB07B2L2
CB07Q2L0
CB07Q2L1
CB07Q2L2
Polarizing
Position 3
(Green)
CB07C3L0
CB07C3L1
CB07C3L2
CB07T3L0
CB07T3L1
CB07T3L2
CB07B3L0
CB07B3L1
CB07B3L2
CB07Q3L0
CB07Q3L1
CB07Q3L2
Polarizing
Position 4
(Pink)
CB07C4L0
CB07C4L1
CB07C4L2
CB07T4L0
CB07T4L1
CB07T4L2
CB07B4L0
CB07B4L1
CB07B4L2
CB07Q4L0
CB07Q4L1
CB07Q4L2
© 2007 Glenair, Inc.
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
10
E-Mail: [e-mail]