947-115_15 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Mount Hermetic Bulkhead Feed-Thru

947-115
Jam Nut Mount Hermetic Bulkhead Feed-Thru
.250/.500 inch Panel
MIL-DTL-38999 Series III Type
Product
Series
Shell Size
Table I
Alternate Key
Position
A, B, C, D, E
(Omit for Normal)
Dash
Number
947 - 115 - 21 - 35 B P 01
Basic
Number
D DIA
Insert Arrangement
Per MIL-DTL-38999
Series III
See MIL-DTL-1560 for
Insert Arrangement
Contact Termination
P - Pin on Jam Nut Side
S - Socket on Jam Nut Side
PP - Pin to Pin
SS - Socket to Socket
J
H
.150
B
Max
.565
Ref
A Thread
G Max Panel
E
C
F Thread
Direction of
Pressure
B
Recommended Panel
Cut-Out
SHELL
SIZE
9
11
13
15
17
19
21
23
25
TABLE I: CONNECTOR DIMENSIONS
A THREAD
0.1 P-0.3L-
TS-2
B
DIM
C DIM
MAX
D
DIA
E
DIM
0.625
.875(22.2) 1.09(27.7) .693 (17.60) .657 (16.70)
0.750
1.000(25.4) 1.28(32.5) .825 (20.96) .771 (19.59)
0.875
1.250(31.8) 1.40(35.6) 1.010 (25.80) .955 (24.26)
1.000
1.375(34.9) 1.53(38.9) 1.135 (25.65) 1.085 (27.56)
1.187
1.500(38.1) 1.66(42.2) 1.260 (28.83) 1.210 (30.73)
1.250
1.625(41.3) 1.84(46.7) 1.385 (32.01) 1.335 (33.91)
1.375
1.750(44.5) 1.97(50.5) 1.510 (35.18) 1.460 (37.08)
1.500
1.875(47.6) 2.09(53.1) 1.635 (41.53) 1.585 (40.26)
1.625
2.000(50.8) 2.21(56.1) 1.760 (44.70) 1.710 (43.43)
F THREAD
x1-6g-0.100R
M17
M20
M25
M28
M32
M35
M38
M41
M44
HERMETIC LEAK RATE MOD CODES
Designator
Required Leak Rate
–585A
1 x 10^-10 cc Helium per second
–585B
1 x 10^-9 cc Helium per second
–585C
1 x 10^-8 cc Helium per second
TABLE III: PANEL
THICKNESS
DASH
NO
G
MAX
H
MAX
J
MAX
01 .250(6.4) 1.08(27.4) 1.79(45.5)
02 .500(12.7) 1.33(33.8) 2.04(51.8)
APPLICATION NOTES
1. Assembly identified with manufacturer’s name and PN, space
5. Electrical safety limits must be established by user, peak
permitting.
voltage, switching surge, transient, etc. should be used
2. For pin/pin and skt/skt, symmetrical layouts only, consult factory for
to determine the safety of the application.
available insert arrangements.
6. Material/finish:
3. Power to a given contact on one end will result in power to contact
directly opposite, regardless of identification letter.
Shell, lock ring, jam nut—stainless steel/passivate
Contacts—copper alloy/gold plate and alloy 52/gold plate
Insulators—high-grade rigid dielectric/N.A. and full glass.
4. Hermeticity = less than 1 x 10^-7 cc/sec at one atmosphere. Not for use
Seals—fluorosilicone/ N.A.
in liquid atmosphere.
7. Metric dimensions (mm) are indicated in parentheses.
© 2013 Glenair, Inc.
Dimensions in Inches (millimeters) are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-79
E-Mail: [e-mail]