947-115 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Mount Hermetic Bulkhead Feed-Thru

947-115
Jam Nut Mount Hermetic Bulkhead Feed-Thru
.250/.500^inch Panel
MIL-DTL-38999 Series III Type
Designator
Table Below)
Product
Series
Shell Size
Table I
Alternate Key
Position
A, B, C, D, E
(N = Normal)
Dash
Number
947 - 115 - 21 - 35 B P 01
85 B
Basic
Number
Insert Arrangement
Per MIL-DTL-38999
Series III
See MIL-DTL-1560 for
Insert Arrangement
Contact Termination
P - Pin on Jam Nut Side
S - Socket on Jam Nut Side
PP - Pin to Pin
SS - Socket to Socket
J
H
.150
Max
.565
Ref
B
Code
meticity Mod _ECode
D DIA
Recommended Panel Cut-Out
B
A Thread
C
F Thread
G Max Panel
Direction of
Pressure
RATE MOD CODES
uired Leak Rate
TABLE I: CONNECTOR DIMENSIONS
SHELL A THREAD
B
C DIM
D
E
SIZE 0.1 P-0.3L-TS-2
DIM
MAX
DIA
DIM
0 _{cc’s Helium per se9cond 0.625}
.875(22.2) 1.09(27.7) .698(17.7) .670(17.0)
11
cc’s Helium per se₁c₃ond
0.750
0.875
1.000(25.4) 1.28(32.5) .822(20.9) .770(19.6)
1.250(31.8) 1.40(35.6) 1.010(27.6) .955(24.3)
F THREAD
x1-6g-0.100R
M17
M20
M25
HERMETIC LEAK RATE MOD CODES
Designator
Required Leak Rate
–585A
–585B
–585C
1 x 10^-10 cc’s Helium per second
1 x 10^-9 cc’s Helium per second
1 x 10^-8 cc’s Helium per second
15
1.000
1.375(34.9) 1.53(38.9) 1.135(28.8) 1.085(27.6)
M28
cc’s Helium per se₁c₇ond _1.187
1.500(38.1) 1.66(42.2) 1.260(32.0) 1.210(30.7)
M32
19
1.250
1.625(41.3) 1.84(46.7) 1.385(35.2) 1.335(33.9)
M35
21
1.375
1.750(44.5) 1.97(50.5) 1.510(38.4) 1.460(37.1)
M38
TABLE III: PANEL
THICKNESS
DASH
G
H
J
NO
MAX
MAX
MAX
23
CATION CODE₂S₅
ening Plus Outgassing
Processing
1.500
1.625
1.875(47.6) 2.09(53.1) 1.635(41.5) 1.635(41.5)
M41
2.000(50.8) 2.21(56.1) 1.760(44.7) 1.710(43.4)
M44
APPLICATION NOTES
01 .250(6.4) 1.08(27.4) 1.79(45.5)
02 .500(12.7) 1.33(33.8) 2.04(51.8)
en
Thermal₁v_.acu_Au_ssm_{embly identified with manufacturer’s name and PN, space}
Outgassin_pg_ermitting.
5. Electrical safety limits must be established by user, peak
voltage, switching surge, transient, etc. should be used
24 hrs. ₂1_.25° _{FCo.r pin/pin and skt/skt, symmetrical layouts only, consult factory for}
to determine the safety of the application.
available insert arrangements.
6. Material/finish:
J
Mod 4_3.29C_{Power to a given contact on one end will result in power to contact}
directly opposite, regardless of identification letter.
Shell, lock ring, jam nut—stainless steel/passivate
Contacts—copper alloy/gold plate and alloy 52/gold plate
Insulators—high-grade rigid dielectric/N.A. and full glass.
K
Mod ⁴4^.29A^{Hermeticity = less than 1 x 10-7 cc/sec at one atmosphere. Not for use}
Seals—fluorosilicone/ N.A.
in liquid atmosphere.
7. Metric dimensions (mm) are indicated in parentheses.
Mod 186M
© 2009 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
B-51
E-Mail: [e-mail]