886-014 Datasheet, PDF (1/2 Pages) Glenair, Inc. – “Cobra” QDC Cordset

SERIES 886
“Cobra” QDC Cordset
886-014 Single-Ended Overmolded “Cobra”
Cordset with 180° Entry Plug
886-014 QUICK DISCONNECT “COBRA” PLUG WITH POLYURETHANE JACKET AND SHIELDED WIRE
Polyurethane jacketed, Superfly® quick disconnect (QDC) single-ended cordsets
with polyamide overmolded 180° Cobra connector. Three contact sizes are available,
5A, 3A and 1A. Aluminum or stainless steel housings, thermoplastic insulator, high-
strength wire with crosslinked ETFE insulation. High performance crimp contacts,
factory terminated to wires. Braided shield with 90% coverage.
Sample Part Number
How To Order
886-014P A
Series
886-014P = Overmolded Cobra QDC cordset with 180° entry Plug
Insert Configuaration
Shell Size and
Insert Arrangement¹
Shell Material/Finish²
Master Key Location
A = Unshrouded Contacts  B = Shrouded Contacts
See Shell Size and Insert Arrangement Table
M = Aluminum/electroless nickel RoHS compliant
ZR = Aluminum/zinc-nickel, non-reflective with RoHS compliant black chromate
MT = Aluminum/nickel-PTFE RoHS compliant
NF = Aluminum/olive drab over cadmium
ZC = Stainless steel/black zinc cobalt
ZK = Stainless steel/passivate
ZMT = Stainless steel/nickel-PTFE RoHS compliant
0 thru 350° in 30° increments. See Master Key Location table
Wire Length
18 = 18 inches
-B7N -MT -06 -18
MOD-686 POLARIZING OPTIONS
Standard SuperFly® connectors have a single master key. Versions with three keys
are also available if alternate key positions are required. Add suffix code 686 to the
part number per the following example: 886-014PA-B7N-MT-0-18-686A
WIRE GAUGES PER CONTACT
• 1A. contact (Nano) - 30 AWG
• 3A. contact (Micro) - 26 AWG
• 5A. contact (Size 23) - 24 AWG
D
Plug Alternate Key Positions
Suffix Code
A°
B°
686A
150°
210°
686B
75°
210°
686C
95°
230°
686D
140°
275°
686E
75°
275°
686F
95°
210°
B° A°
Master
Key
18
© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 88 SuperFly® Catalog
Dimensions in Inches (millimeters) are subject to change without notice.