859-015 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Wire Barrel Reducer Bushing

Wire Barrel Reducer Bushing
859-015
Wire Barrel Reducer Bushing
For Use with Crimp Contacts
859-015 - Basic
Part Number
“To” Wire Accommodation
See completed part numbers
for list of available combinations.
859-015 Z2 - 16 - 22
Available Finishes
Z2 - Gold Plate
Z3 - Silver Plate
“From”
Contact Wire Barrel Size
10, 12, 16, 20
D
Material and Finish
Copper alloy with gold or silver plate (see part number development)
Notes
Bushings are designed to reduce the barrel size of crimp contacts to accomodate smaller
wire gages than specified in M39029.
Bushing must be pressed into contact by hand before crimping.
For proper environmental sealing against the rear connector grommet, use of shrink sleeve
or potting may be required.
© 2011 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-30
E-Mail: [e-mail]