850-013 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Mighty Mouse Connectors

Mighty Mouse Connectors with Size #8 Quadrax,
Twinax, Coax or Power Contacts
Size #8 Power Contacts 850-013, 850-014
Size #8 power contacts
K
Fig. 2
Socket
Fig. 1
Pin
.708 (17.98)
REF
Ø.316 (8.03)
.313 (7.95)
.410 (10.41)
MIN
Power contacts accept #8 AWG wire. These contacts fit Mighty Mouse connectors
with size 8 cavities. Supplied with sealing boot. 46 amp current rating. Gold-plated
copper alloy. Socket contact has stainless steel hood. Conforms to SAE AS39029
requirements. Terminate with pneumatic crimp tool shown on next page.
Figure
Fig. 1
Fig. 2
Contact Type Conductor Size
Pin
#8
Socket
#8
Part Number
Contact Only
850-014
850-013
Part Number
Contact and Sealing
Boot
850-014F
850-013F
1.026 (26.06)
REF
.410 (10.41)
MIN
.219 (5.56)
.217 (5.51)
.033 (0.84)
.029 (0.74)
Fig. 1
Pin Contact 850-014
Materials, Finishes
Contact material
Copper Alloy
Contact finish
50 microinches gold
over nickel plating
Socket Contact Hood
Stainless steel,
passivated
.265 (6.73) .285 (7.24)
.262 (6.65)
.265 (6.73)
.262 (6.65)
Ø.179 (4.55)
MIN
SST HOOD
Ø.316 (8.03)
.313 (7.95)
.033 (0.84)
.029 (0.74)
Fig. 2
Socket Contact 850-013
Ø.179
(4.55) MIN
DESCRIPTION
Test Current
Contact Resistance
Minimum Separation Force
Crimp Tensile Strength
Durability
Specifications
REQUIREMENT
46 Amperes
26 millivolts maximum
5 ounce minimum
220 lbs. (978 newtons)
500 mating cycles
PROCEDURE
SAE AS39029 para. 4.7.5, EIA-364-06
SAE AS39029 para. 4.7.5, EIA-364-06
SAE AS39029 para. 4.7.6, EIA-364-37
SAE AS39029 para. 4.7.9, EIA-364-08
SAE AS39029 para. 4.7.10
Size Part Number
#8
859-049
Military Part
Number
M81969/14-12
Sealing Boot
Sealing boot provides wire seal. Slide
boot onto wire before terminating
contact. After contact is installed in
connector, slide boot forward into
connector grommet to seal the contact
cavity. "F" suffix added on contact part
number specifies contact supplied with
sealing boot P/N 859-042-03.
Wire Dia. (in.)
.090 - .130
.130 - .170
.170 - .205
Wire Dia.
(mm.)
2.3 - 3.3
3.3 - 4.3
4.3 - 5.2
.985 (25.02)
MAX
Part Number
859-042-01
859-042-02
859-042-03
.350
(8.89)
.326
(8.28)
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
K-22
E-Mail: [e-mail]