809S060 Datasheet, PDF (1/4 Pages) Glenair, Inc. – Series 811 Mighty Mouse High Density (HD) Shrink Boots 809S060 and 809A060

Series 811 Mighty Mouse High Density (HD)
Shrink Boots
809S060 and 809A060
Shrink Boots – Straight and Right Angle for Series 811 Connectors
Protect Your Cable Harness with heat-shrinkable boots. These easy-to-use boots
provide excellent electrical, mechanical and environmental protection. Heating
the boot causes the boot to shrink onto the connector and cable . An optional
adhesive lining bonds the boot to the connector and cable and fills small
gaps for a complete seal. Choose straight cable exit or right angle exit. These
lipped boots attach directly to Series 811 Mighty Mouse HD connectors with
integral band platform. After shrinking, the boot lip locks into groove. Choose
Type 1 high performance elastomer for extreme temperatures and excellent
resistance to fuels and oils, Type 2 non-halogenated flame-retardant polyolefin
for use where limited fire hazard is required.
Material Selection Guide
Attribute
Continuous Operating Temp.
Resistance to Fuels, Oils
Low Toxicity, Zero Halogen
Type 1
High Performance
Semi-Rigid
Elastomer
-75° to +150°C
Excellent
No
Type 2
Zero Halogen
Semi-Rigid
Polyolefin
-30° to +125°C
Very Good
Yes
CONNECTOR
HEATSHRINK
BOOT
BOOT LIP
LIPPED BOOT
Type 1 High performance Elastomer
Semi-rigid high performance boots combine excellent resistance to fuels, oils
and solvents with superior performance at extreme temperatures. Rated for
3000 hours continuous operation at +150° C, these boots fit most standard
boot adapters for circular connectors. Material meets the requirements of
VG95343 Type 6, BSG 198-5-DE, EN62329-102 and SAE AS5258 Type H. These
boots are recommended for demanding applications such as military vehicles
and petrochemical exploration. Black color.
Type 2 Zero halogen
Halogen-free polyolefin boots meet low smoke and toxicity requirements
of shipboard, transit and aircraft systems. These Low Smoke/Zero Halogen
(LSZH) boots fit most standard shrink boot adapters, including M85049 types
along with Glenair Series 31 and Series 44 adapters. Oxygen index greater
than 30%, smoke index less than 20, and toxicity index under 3 per 100 grams.
Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG
198-5-DF, EN62329-101 and SAE AS5258 Type G. Good resistance to oils, fuels
and solvents. These boots provide strain relief and environmental protection to
connector/cable transitions. Temperature rating -30° to +125° C. Black color.
Dimensions in Inches (millimeters) are subject to change without notice.
© 2011 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
25
E-Mail: [e-mail]