805-115 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Mighty Mouse High-Speed Cordset

Series 805 eSATA Cordsets
Mighty Mouse High-Speed Cordset with Triple-Start ACME
Threads to Industry Standard L-COM Connector
805-115 Ordering Information
Series 805 High-Speed cordsets
For optimal data transmission performance and environmental sealing, choose
Glenair high-speed cordsets. Factory-terminated connectors have their rear
grommets removed to maintain the construction of the matched-impedance pair
cable through the connector for improved high-speed performance. Cordsets are
sealed with either rugged polyamide overmold or a factory-installed heat shrink
boot for strain relief and environmental sealing against moisture and contamination.
Cordsets are terminated to industry-standard commercial connectors. Order with
or without metal protective covers. All cordests are 100% electrically tested for
shorts, continuity, and IR 200 Megohms minimum.
805-115: Series 805 Mighty Mouse High-Speed eSATA Overmolded Cordset
"LENGTH" MIN (SEE P/N DEVELOPMENT)
P1
PROTECTIVE COVER,
667-261 OR 667-262
"PART NUMBER"
GLENAIR YYWW 06324
SHRINK BOOT,
809S060-2
GLENAIR HIGH-SPEED CONNECTOR,
805-020-16 PLUG (REF) OR
805-022-01 RECEPTACLE (REF)
8-7 INSERT ARRANGEMENT
(GROMMET REMOVED)
BRADY LABEL,
LAT-18 OR EQ.
APPROX LOCATION:
CENTER OF CABLE
P2
L-COM eSATA
CABLE ASSY,
CAESA
How To Order
P1
Sample Part Number
Series
805-115 -A NF N A -48
6
1
805-115 = Back-to-Back
2
eSATA Overmolded
cordset.
7
-A = Plug with Pin Contacts
5
-B = Plug with Socket Contacts
4
P1 Connector
-C = Receptacle with Pin Contacts
3
-D = Receptacle with Socket
Contacts
R
Shell Material / Finish
M = Aluminum / Electroless Nickel RoHS
Compliant
NF = Aluminum / Cadmium with Olive
Drab Chromate
ZNU = Aluminum / Zinc-Nickel with
Black Chromate
MT = Aluminum / Nickel-PTFE, RoHS
Compliant
Z1 = Stainless Steel / Passivated RoHS
Compliant
Protective Cover
P = Metal Protective Covers Included
N = No Covers Supplied
Shell Key Pos. (See Page Q3) A (Normal), B, C, D, E, F
Length
Overall Length In Inches 76" Max
WIRING DIAGRAM
P2
DRAIN
1
WHT 26 AWG
2
WHT 26 AWG
3
DRAIN
DRAIN
4
WHT 26 AWG
5
WHT 26 AWG
6
DRAIN
7
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
R-14
E-Mail: [e-mail]