805-112 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Mighty Mouse High-Speed Back–to–Back

Series 805 eSATA Cordsets
Mighty Mouse High-Speed Back–to–Back
eSATA Cordset with Triple-Start ACME Threads
805-112 Ordering Information
100 Ohm differential parallel pair
cordsets optimized for eSATA,
Ethernet, and USB protocols
Series 805 High-Speed cordsets
For optimal data transmission performance and environmental sealing, choose
Glenair high-speed cordsets. Factory-terminated connectors have their rear
grommets removed to maintain the construction of the matched-impedance pair
cable through the connector for improved high-speed performance. Cordsets
are sealed with either rugged polyamide overmold or a factory-installed heat
shrink boot for strain relief and environmental sealing against moisture and
contamination. Choose “Back to Back” versions with Series 80 Mighty Mouse
High-Speed connectors on both ends, or cordsets terminated to industry-standard
commercial connectors. Order with or without metal protective covers. All cordests
are 100% electrically tested for shorts, continuity, and IR 200 Megohms minimum.
805-112: Series 805 Mighty Mouse High-Speed eSata Overmolded Cordset
"LENGTH" MIN (SEE P/N DEVELOPMENT)
P1
"PART NUMBER"
GLENAIR YYWW 06324
P2
GLENAIR HIGH-SPEED CONNECTOR,
805-020-16 PLUG OR
805-022-01 RECEPTACLE
8-7 INSERT ARRANGEMENT
(GROMMETS REMOVED)
GLENAIR BULK
eSATA CABLE,
963-013
BRADY LABEL,
LAT-18 OR EQ.
APPROX LOCATION:
CENTER OF CABLE
POLYAMIDE
OVERMOLD
PROTECTIVE COVER,
667-261 OR 667-262
How To Order
Sample Part Number
805-112 -A D NF N A -48
Series
805-112 = Back-to-Back eSATA Overmolded cordset
P1 Connector
-A = Plug, Pin Contacts
-C = Receptacle Pin Contacts
-B = Plug, Socket Contacts
-D = Receptacle, Socket Contacts
A = Plug, Pin Contacts
B = Plug, Socket Contacts
P2 Connector
C = Receptacle, Pin Contacts
D = Receptacle, Socket Contacts
N = No Connector (Single-Ended)
M = Aluminum / Electroless Nickel RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
Shell Material / Finish
ZNU = Aluminum / Zinc-Nickel with Black Chromate
R
MT = Aluminum / Nickel-PTFE, RoHS Compliant
Z1 = Stainless Steel / Passivated RoHS Compliant
Protective Cover
P = Metal Protective Covers Included  N = No Covers Supplied
Shell Key Pos. (See Page N3) A (Normal), B, C, D, E, F
Length
Overall Length In Inches 78" Max
P1
WIRING DIAGRAM _P2
6
DRAIN
6
1
WHT 28 AWG ₁
2
BLU 28 AWG ₂
DRAIN
7
DRAIN
7
5
WHT 28 AWG ₅
4
ORN 28 AWG ₄
3
DRAIN
3
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
R-11
E-Mail: [e-mail]