805-005 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Mighty Mouse Triple-Start ACME Thread

Series 805 Mighty Mouse Triple-Start ACME Thread
PCB or Solder Cup Receptacle
805-005 and 805-017 Ordering Information
Printed Circuit Board/Solder Cup Receptacles feature low profile shells for
minimum protrusion inside enclosures and integral standoffs for board washout.
Contacts are non-removable.
Water Immersion, Unmated Specify 805-005 connectors for applications where
open face water immersion is not a requirement. For MIL-STD-810 Method 512G
immersion requirements, specify 805-017 watertight connectors . These 805-017­­
connectors are specially sealed (“MOD-518”) and are 100% tested to maintain a
helium leak rate of 1 x 10^-4 cc/second at one atmosphere pressure differential from
-40° C to +70° C.
How To Order
Sample Part Number
805-017 -07 M 10-13 P
B
Series
Shell Style (See Table I)
Shell Material and Finish
Shell Size - Insert
Arrangement
Contact Type
Shell Key Positions
(See Table II)
805-005 = Receptacle with Standard Epoxy Potting
805-017 = Receptacle with Special “MOD-518” Sealing For Open Face
(unmated) Water Immersion Requirements. 100% Leak Tested.
-02 = Square Flange Front or Rear Mount
-12 = Square Flange Rear Mount Non-Locking Clinch Nuts
-22 = Square Flange Rear Mount Locking Clinch Nuts
-07 = Jam Nut Rear Panel Mount
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
ZB = Stainless Steel / Olive Drab Chromate over Cadmium
ZC = Stainless Steel / Zinc Cobalt Alloy/Black Chromate
See Contact Arrangements Page H-2
P = Pin, PC Tail
S = Socket, PC Tail
E = Pin, Solder Cup
F = Socket, Solder Cup
A = Normal  B = Pos. B  C = Pos. C  D = Pos. D  E = Pos. E  F = Pos. F
Table I: Shell Style
H
-02, -12, -22
Square Flange
-07
Jam Nut
Key Position
Normal (A)
B
C
D
E
F
Table II: Key Positions
Key Rotation
A
B
150°
210°
75°
210°
95°
230°
140°
275°
75°
275°
95°
210°
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
H-18
E-Mail: [e-mail]