804-030 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Push-Pull High-Speed Mighty Mouse

Series 804 Push-Pull High-Speed Mighty Mouse
Rear and Front Mount Jam-Nut PCB or Solder Cup Receptacle
804-030 and 804-031 Ordering Information
Panel Mount Receptacles feature factory-installed non-
removable contacts. Choose solder cup or printed circuit
board terminals. Front or rear panel mount versions available.
Water Immersion, Unmated Specify 804-030 connectors
for applications where open face water immersion is
not a requirement. For MIL-STD-810 Method 512G immersion
requirements, specify 804-031 watertight connectors . These
804-031 connectors are specially sealed (“MOD-518”) and
are 100% tested to maintain a helium leak rate of 1 x 10^-4 cc/
second at one atmosphere pressure differential from -40°C
to +70°C.
High–Speed Performance
Impedance
100 Ω± 20Ω at
200 Picoseconds
Insertion Loss
500 MHz
.71 dB
1 GHz
1.55 dB
1.5 GHz
2.75 dB
2 GHz
4.00 dB
How To Order
Sample Part Number
804-030
-00 M 6-7 P A
Series
804-030 = Receptacle for Solder Cup or PCB Termination, With Standard Epoxy
Potting
804-031 = Receptacle for Solder Cup or PCB Termination, With Special “MOD-518”
Sealing For Open Face (unmated) Water Immersion Requirements. 100% Leak
Tested.
Shell Style (See Table I)
-00 = Jam Nut, Front Panel Mount
-07 = Jam Nut, Rear Panel Mounting
M = Aluminum / Electroless Nickel RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZN = Aluminum / Zinc-Nickel with Olive Drab Chromate
Shell Material and Finish ZNU = Aluminum / Zinc-Nickel with Black Chromate
ZB = Stainless Steel / Olive Drab Chromate over Cadmium
ZC = Stainless Steel / Zinc Cobalt Alloy / Black Chromate
Q
Shell Size - Insert
Arrangement (See Table Ii)
Z1 = Stainless Steel / Passivated RoHS Compliant
6-4, 6-7, 7-10, 9-19, 10-26
Contact Type
Connector supplied with contacts
P = Pin
E = Pin, Solder Cup
S = Socket
F = Socket, Solder Cup
Shell Key Positions
(See Table III)
Omit for Single Master Key
A = Normal  B = Pos. B  C = Pos. C  D = Pos. D  E = Pos. F  F = Pos. F
Table I: Shell Style
12
43
Table II: Shell Size – Insert Arrangement
12
6⁷
3
54
2
3
1
7
4
10
8
9
3 ¹²
6
4
11
9
15
12
18
16
23
21
25 ₂₆ 24
3 ¹²
6
4
11
9
15
12
18
16
23
21
25 ₂₆ 24
-00
-07
6-4
6-7
7-10
9-19
Jam Nut, Front Panel Jam Nut, Rear Panel
Mount
10-26
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Q-10
E-Mail: [e-mail]