804-009 Datasheet, PDF (1/1 Pages) Glenair, Inc. – PC Tail or Solder Cup Panel Mount Plug

Series 804 Push-Pull Mighty Mouse
PC Tail or Solder Cup Panel Mount Plug
804-009, 804-021 Ordering Information
Panel Mount Plugs save space inside the box compared to Series 804 removable
contact receptacles. Factory-installed non-removable contacts. Solder cup or
printed circuit board terminals. Available in front or rear panel and flange mount
versions.
Ingress Protection, Unmated Specify 804-009 connectors for applications where
open face water immersion is not a requirement. For IP67 ingress protection and
MIL-STD-810 Method 512 immersion requirements, specify 804-021 watertight
connectors certified to meet one atmosphere pressure differential in open face
condition from -40° to +70°C.
"Push-Pull" Quick-Disconnect Canted spring securely retains the mating plug.
How To Order
Sample Part Number
804-009
-07 NF 10-26 E
A
804-009 = Panel Mount Plug, Standard Potting
Series
804-021 = Panel Mount Plug,Resilient Silicone Potting for
Watertight Seal from -40° to +70°C (1 ATM Pressure Differential)
-00 = Front Panel Mount Jam Nut (See Table IV)
Shell Style (See Table I)
-02 = Flange Mount
-07 = Rear Panel Mount Jam Nut (See Table III)
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
Shell Material and Finish
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
Shell Size - Insert Arrangement See Contact Arrangements Page G-2
Contact Type
P = Pin, PC Tail E = Pin, Solder Cup
S = Socket, PC Tail F = Socket, Solder Cup
Shell Key Positions
(See Table II)
Omit = Single Master Key  A = Normal  B = Pos. B  C = Pos. C  D = Pos. D  E = Pos. E  F = Pos. F
Table I: Shell Style
Table II: Alternate Keyway Positions
Pos. A° B°
G
-00
Jam Nut, Front Panel
Mount
-07
Jam Nut, Rear Panel
Mount
-02
Flange Mount
A°
B°
A 150° 210°
B 75° 210°
C 95° 230°
D 140° 275°
E 75° 275°
F 95° 210°
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-11
E-Mail: [e-mail]