804-003 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Receptacle Connector

Series 804 Push-Pull Mighty Mouse
Receptacle Connector
804-003 and 804-004 Ordering Information
In-Line
Rear Panel Mount
Jam Nut
Front Panel Mount
Jam Nut
Integral Band Platform
for direct attachment of a cable shield. Install a boot, or
overmold directly onto the band platform. Or, choose an
accessory thread for attaching strain reliefs and backshells.
Three Shell Styles
Jam nut with O-ring for front or rear panel mounting, or in-line
receptacles for free-hanging cables.
Watertight, Shielded
O-ring inside the receptacle provides a dynamic seal when
mated. Gold-plated spring provides secure mechanical
retention and low shell-to-shell resistance for excellent EMI
shielding.
How To Order
Sample Part Number
804-003
-01 M 7-10 P
Series (See Table I)
804-003 = Receptacle with Banding Platform
804-004 = Receptacle with Accessory Thread
Shell Style (See Table II)
-00 = Front Panel Mount Jam Nut (See Table V)
-01 = In-Line
-07 = Rear Panel Mount Jam Nut (See Table IV)
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
Shell Material and Finish
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
Shell Size - Insert Arrangement See Contact Arrangements Page G-2
Connector supplied Connector supplied Connector Supplied
without contacts Crimp contacts with 30 AWG Crimp Barrel
A = Pin, Crimp P = Pin Connector G = Pin, Crimp
Contact Type
B = Socket, Crimp S = Socket Connector H = Socket, Crimp
Connectors with contacts are supplied with signal and/or power crimp contacts.
These contacts are not installed.
Coaxial contacts and non-standard signal contacts are ordered separately.
G
Shell Key Positions
(See Table III)
Omit = Single Master Key  A = Normal  B = Pos. B  C = Pos. C  D = Pos. D  E = Pos. E  F = Pos. F
Table I: Series
Table II: Shell Style
804-003
Receptacle with Banding
Platform
804-004
Receptacle with Accessory
Thread
-00
Jam Nut for Front Panel
Mounting
-01
In-Line for Free-Hanging
Cable
-07
Jam Nut for Rear Panel
Mounting
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-15
E-Mail: [e-mail]