803-005 Datasheet, PDF (1/1 Pages) Glenair, Inc. – PC Tail and Solder Cup Receptacle

Series 803 Mighty Mouse ¼ Turn Bayonet
PC Tail and Solder Cup Receptacle
803-005 and 803-015 Ordering Information
Printed Circuit Board/ Solder Cup Receptacles feature low profile shells for
minimum protrusion inside enclosures and integral standoffs for board washout.
Contacts are non-removable.
Water Immersion, Unmated Specify 803-005 connectors for applications where open
face water immersion is not a requirement. For MIL-STD-810 Method 512G immersion
requirements, specify 803-015 watertight connectors . These 803-015 connectors
are specially sealed (“MOD-518”) and are 100% tested to maintain a helium leak rate
of 1 x 10^-4 cc/second at one atmosphere pressure differential from -40°C to +70°C.
NOTE: mated connectors are not submersible.
How To Order
Sample Part Number
803-005
-02 ZN 6-7 S
N
Series
803-005 = Receptacle, Solder Cup or PCB Contacts
803-015 = Receptacle, Solder Cup or PCB Contacts; Watertight
Shell Style (See Table I)
-02 = Flange Mount  -07 = Jam Nut (See Page
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
Shell Material and Finish
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
Shell Size - Insert Arrangement See Contact Arrangements Page F-2
Contact Type
P = Pin, PC Tail
S = Socket PC Tail
E = Pin, Solder Cup
F = Socket, Solder Cup
F
Shell Key Positions
(See Table II)
N = Normal  X = Pos. X  Y = Pos. y  Z = Pos. Z
Table I: Shell Style
-02
Flange Mount
-07
Jam Nut
Table II: Alternate Key Positions
Pos. A°
B°
N 150° 210°
A° B°
X
75° 210°
Y
95° 230°
Z 140° 275°
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-12
E-Mail: [e-mail]