803-003 Datasheet, PDF (1/1 Pages) Glenair, Inc. – 1/4 Turn Bayonet Receptacle

Series 803 Mighty Mouse
¼ Turn Bayonet Receptacle
803-003 and 803-004 Ordering Information
In-Line
Jam Nut
Flange Mount
Push-To-Mate, ¼ Turn to Lock. These
quick-mating connectors feature bayonet
pins on the receptacle. Simply push the
connectors together, then rotate the plug
coupling nut 90° to lock the connectors
together.
Three Shell Mounting Options:
Jam nut with O-ring for rear panel
mounting, elliptical flange for front
or rear panel mounting, or in-line
receptacles for free-hanging cables.
Two Shell Styles: Choose the integral
band platform for direct attachment of
a cable shield. Install a heat-shrink boot,
or overmold directly onto the band
platform. An accessory thread is available
for attaching strain reliefs and backshells.
How To Order
Sample Part Number
803-003
-07 NF 6-7 S
N
Series (See Table I)
803-003 = Receptacle with Banding Platform
803-004 = Receptacle with Accessory Thread
Shell Style (See Table II)
-01 = In-Line  -02 = Flange Mount  -07 = Jam Nut
C = Aluminum / Black Anodize (Non-Conductive); RoHS Compliant
M = Aluminum / Electroless Nickel; RoHS Compliant
Shell Material and Finish
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated; RoHS Compliant
Shell Size - Insert Arrangement See Contact Arrangements Page F-2
Connector supplied with contacts
Connector supplied without contacts
F
Contact Type
P = Pin
A = Pin Connector, less contacts
S = Socket
B = Socket Connector, less contacts
Connectors with contacts are supplied with signal and/or power crimp contacts. These contacts are not
installed.
Coaxial contacts and non-standard signal contacts are ordered separately.
Shell Key Positions
(See Table III)
N = Normal  X = Pos. X  Y = Pos. y  Z = Pos. Z
Table I: Series
Table II: Shell Style
803-003
803-004
Plug with Banding Platform Plug with Accessory Thread
-01
In-line
-02
Flange Mount
-07
Jam Nut
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-8
E-Mail: [e-mail]