801-011 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Double-Start ACME Thread PCB Receptacle

Series 801 Mighty Mouse
Double-Start ACME Thread PCB Receptacle
801-011 and 801-033 Ordering Information
Printed Circuit Board Receptacles feature low profile shells for minimum
protrusion inside enclosures and integral standoffs for board washout. Contacts
are non-removable.
Water Immersion, Unmated Specify 801-011 connectors for applications where
open face water immersion is not a requirement. For MIL-STD-810 Method 512G
immersion requirements, specify 801-033 watertight connectors . These 801-033
connectors are specially sealed ("MOD-518") and are 100% tested to maintain a
helium leak rate of 1 x 10^-4 cc/second at one atmosphere pressure differential from
-40C to +70C.
How To Order
Sample Part Number
801-011 -02 M 6-7 P A
Series
D
Shell Style
(See Table I)
Material and Finish
Shell Size - Insert
Arrangement
Contact Type
Shell Key Positions
(See Table II)
801-011 = Receptacle for Solder Cup or PCB Termination, with Standard Epoxy
801-033 = Receptacle for Solder Cup or PCB Termination, With Special “MOD-518”
Sealing For Open Face (unmated) Water Immersion Requirements. 100% Leak
Tested.
-02 = Square Flange Front or Rear Mount
-12 = Square Flange Rear Mount Non-Locking Clinch Nuts
-22 = Square Flange Rear Mount Locking Clinch Nuts
-07 = Jam Nut
M = Aluminum / Electroless Nickel RoHS Compliant
MT = Aluminum / Nickel-PTFE RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
Z1 = Stainless Steel / Passivated RoHS Compliant
See Contact Arrangements page D-2
E = Pin, Solder Cup
F = Socket, Solder Cup
P = Pin, PC Tail
S = Socket, PC Tail
A = Normal  B = Pos. B  C = Pos. C  D = Pos. D  E = Pos. F  F = Pos. F
Table I: Shell Style
Style -02/-12/-22
Square Flange
Style -01
Jam Nut
Table II: Alternate Keyway Positions
A°
B°
A
150° 210°
B
75° 210°
C
95° 230°
D 140° 275°
E
75° 275°
F
95° 210°
A°
B°
PC Tail Dimensions
Contact Size
ØS
#23
Ø .018/.022
#20
Ø .028/.024
#16
Ø .060/.064
#12
Ø .092/.096
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-20
E-Mail: [e-mail]