800-032 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Right Angle Printed Circuit Board Receptacle Headers

Series 800 Mighty Mouse UN Mating Thread
Right Angle Printed Circuit Board Receptacle Headers
800-032 Ordering Information
Printed Circuit Board Right Angle I/O Header features gold-plated size #23
contacts. UN mating thread, and aluminum or stainless steel shells. Rubber seal
protects mated connectors from water ingress. 5 amp current rating, 500 VAC
voltage rating. Contacts are factory-installed and are non-removable. Thermoplastic
rear housing has #2-56 threaded inserts for attaching to circuit board with
customer-supplied mounting screws. Connectors attach to chassis or panel with
low-profile jam nut and O-ring. Available in six contact arrangements, these right
angle headers are ideal for hostile environments where 100/1000BASE-T Ethernet
applications where commercial-grade RJ-45 jacks are not advised.
How To Order
Recommended Panel Cutout
Sample Part Number
800-032 -07 M 7-10 P Z
øB
C
Series
800-032 PCB Receptacle
A FLAT
Shell Style
-07 = Jam Nut
Shell Material and Finish
Shell Size - Insert
Arrangement
Contact Type
Shell Key Position
(See Table I)
C = Aluminum / Black Anodize (Non-
Conductive) RoHS Compliant
M = Aluminum / Electroless Nickel RoHS
Compliant
NF = Aluminum / Cadmium with Olive Drab
Chromate
ZNU = Aluminum / Zinc-Nickel with Black
Chromate
MT = Aluminum / Nickel-PTFE RoHS
Compliant
Z1 = Stainless Steel / Passivated RoHS
Compliant
5-3, 6-1, 6-4, 6-6, 6-7, 7-1, 7-10, 8-2, 8-13,
9-4, 9-19, 9-200, 10-2, 10-5, 10-201
P = Pin, PC Tail
S = Socket, PC Tail
N = Normal  X = Pos. X  Y = Pos. Y  Z = Pos. Z
Key Position
N Normal
X
Key
Rotation
150°
140°
Table I: Shell Key Positions
Shell Size 5 and 6 Key Positions Shell Size 7 thru 12 Key Positions
SHELL SIZE 5, 6, 7, 9
A FLAT
øB
SHELL SIZE 8
Shell
Size
5
6
7-1
7-10
8
9
10
A Flat
In.
mm.
+.004/- +0.10/-
.000 0.00
.292
7.47
.358
9.14
.417 10.64
.417 10.64
.479 12.22
.536 13.67
.610 15.49
øB
In.
mm.
±.005 ±0.13
.322
8.18
.385
9.78
.447 11.35
.449 11.40
.510 12.95
.572 14.53
.635 16.13
Y
130°
Z
120°
Shell size 5 and 6: master
key is located at top dead
center for normal (N)
position.
NORMAL
X°
Y°
Z°
Shell size 7 thru 12: master
60°
key is rotated 90° from TDC
for normal position.
60°
Z°
Y°
X°
NORMAL
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
C-15
E-Mail: [e-mail]